J. Environ. Nanotechnol., Volume 13, No 4, 2024

Analysis of Physical and Chemical Ignition Delay with Di-tert Butyl Peroxide in Diesel Engine using Hydrogen as Gaseous Fuel

Harsh Vardhan, V. N. L. Durga, Chandra Bhushan Kumar

J. Environ. Nanotechnol., Volume 13, No 4 (December 2024) pp. 272-280

doi https://doi.org/10.13074/jent.2024.12.243914

Wear Performance Evaluation of Nano Zirconium Diboride Developed ZK60 Nanocomposite

Srinivasan Suresh Kumar, Vinayagam Mohanavel

J. Environ. Nanotechnol., Volume 13, No 4 (December 2024) pp. 281-286

doi https://doi.org/10.13074/jent.2024.12.243921

Implementing Innovative Weed Detection Techniques for Environmental Sustainability

K. A. Sreeja, Arun Pradeep, M. Arshey, Gayathry S. Warrier, K. T. Ragesh

J. Environ. Nanotechnol., Volume 13, No 4 (December 2024) pp. 287-294

doi https://doi.org/10.13074/jent.2024.12.243947

Development and Characterization of an Eco-friendly Stishovite Clay-manganese Dioxide Nanocomposite for Efficient Dye Removal from Wastewater

K. Prabhakaran, T. Mohanapriya, M. G. Geena, E. Kavitha

J. Environ. Nanotechnol., Volume 13, No 4 (December 2024) pp. 295-303

doi https://doi.org/10.13074/jent.2024.12.244979

Chavibetol Loaded Zinc Oxide Nanoparticles (CB-ZnONPs) for Activity-Enhanced Anticancer Applications against Human Lung (A549)

Balaji Murugesan, Rajesh Pattulingam, Syed Illiyas Syed Maqbool

J. Environ. Nanotechnol., Volume 13, No 4 (December 2024) pp. 304-315

doi https://doi.org/10.13074/jent.2024.12.244997

Evaluating the Influence of Eco-friendly Cryogenic Coolants on Hole Parameters in Deep Hole Drilling of Inconel 718 Alloy

J. Elanchezhian, A. Thanikasalam, B. Arul Kumar, P. Thamizhvalavan, M. Thiyagu, P. Murali

J. Environ. Nanotechnol., Volume 13, No 4 (December 2024) pp. 316-325

doi https://doi.org/10.13074/jent.2024.12.2441029

Structural, Morphological, and Photocatalytic Studies of Co-Doped MoO3 on SiO2: A Multifunctional Material for Environmental Remediation

S. Boobesh, P. Sanjeevi, G. Kalpana, C. Sivaraj, M. Elango

J. Environ. Nanotechnol., Volume 13, No 4 (December 2024) pp. 326-331

doi https://doi.org/10.13074/jent.2024.12.2441088

Enhancement of Mechanical and Wear Properties in 3D-printed PEEK Specimens using Eco-friendly Infill Patterns via Fused Filament Fabrication

Rajeshkumar Dhanapal, Vasudevan Alagumalai, Y. Justin Raj, Sundarakannan Rajendran, Justin Sam George

J. Environ. Nanotechnol., Volume 13, No 4 (December 2024) pp. 332-340

doi https://doi.org/10.13074/jent.2024.12.2441105

Exceptional Cyclic Stability and Performance Characteristics of a Nanostructured rGO–CNT-WO3 Supercapacitor Electrode

M. Kalaivani, B. Gnanavel, S. Krithika

J. Environ. Nanotechnol., Volume 13, No 4 (December 2024) pp. 341-350

doi https://doi.org/10.13074/jent.2024.12.242718

Determination of CO2 Sequestration into Bio-Concrete Bricks Pores using Fungi

Nikita Verma, J. Satya Eswari, Chinmaya Mahapatra

J. Environ. Nanotechnol., Volume 13, No 4 (December 2024) pp. 351-357

doi https://doi.org/10.13074/jent.2024.12.243865

Powered by

Powered by OJS