Hybrid Nanofluid-based Thermal Energy Storage for Next-generation Concentrated Solar Power System
J. Environ. Nanotechnol., Volume 15, No 1 (March 2026) pp. 392-404
Abstract
This study presents an experimental analysis of thermal energy storage (TES) system at high temperatures combined with a parabolic trough solar collector. The system utilizes solar salt (NaNO₃–KNO₃ eutectic) for thermal storage and a graphene–TiO₂/ethylene glycol hybrid nanofluid as the heat transfer medium. The main aim is to assess the impact of the hybrid nanofluid on the charging and discharging performance in outdoor solar operating conditions. A 100-L TES tank with 360 sealed solar saltmodules was charged with an average thermal input of 2.3 kW provided by the solar collector. The temperature changes along the axis during charging and discharging were tracked with several thermocouples. The findings demonstrate enhanced heat transfer during charging, decreased thermal layering close to the melting point of solar salt, and prolonged heat-release time during discharging with the application of the hybrid nanofluid. The system's charging efficiency, discharging efficiency, and round-trip efficiency were 48.6%, 81.6%, and 39.6%, respectively. The results indicate the capability of hybrid nanofluid-assisted heat transfer to improve the thermal performance of molten-salt-based TES systems used in concentrated solar powerapplications.
Full Text
Reference
Abbas, N., Awan, M. B., Amer, M., Ammar, S. M., Sajjad, U., Ali, H. M., Zahra, N., Hussain, M., Badshah, M. A. and Jafry, A. T., Applications of nanofluids in photovoltaic thermal systems: A review of recent advances, Phys. A Stat. Mech. Appl., 536, 122513 (2019).
https://doi.org/10.1016/j.physa.2019.122513
Alhamayani, A., Performance analysis and machine learning algorithms of parabolic trough solar collectors using Al₂O₃–MWCNT as a hybrid nanofluid, Case Stud. Therm. Eng., 57, 104321 (2024).
https://doi.org/10.1016/j.csite.2024.104321
Alhamayani, A. and Al-lehaibi, M., The effect of adding hybrid nanoparticles (Al₂O₃–TiO₂) on the performance of parabolic trough solar collectors using different thermal oils and molten salts, Case Stud. Therm. Eng., 59, 104593 (2024).
https://doi.org/10.1016/j.csite.2024.104593
Al-Rabeeah, A. Y., Seres, I. and Farkas, I., Experimental and numerical investigation of parabolic trough solar collector thermal efficiency enhanced by graphene–Fe₃O₄/water hybrid nanofluid, Res. Eng., 21, 101887 (2024).
https://doi.org/10.1016/j.rineng.2024.101887
Alva, G., Liu, L., Huang, X. and Fang, G., Thermal energy storage materials and systems for solar energy applications: A review, Renew. Sustain. Energy Rev., 68, 693–706 (2017).
https://doi.org/10.1016/j.rser.2016.10.021
Bellos, E. and Tzivanidis, C., Optimization of a solar-driven trigeneration system with nanofluid-based parabolic trough collectors, Energies, 10(7), 848 (2017).
https://doi.org/10.3390/en10070848
Bellos, E., Tzivanidis, C. and Tsimpoukis, D., Enhancing the performance of parabolic trough collectors using nanofluids and turbulators, Renew. Sustain. Energy Rev., 91, 358–375 (2018).
https://doi.org/10.1016/j.rser.2018.03.091
Bradshaw, R. W. and Meeker, D. E., High-temperature stability of ternary nitrate molten salts for solar thermal energy systems, Sol. Energy Mater., 21(1), 51–60 (1990).
https://doi.org/10.1016/0165-1633(90)90042-Y
Brahim, T. and Jemni, A., Comparative study of parabolic trough solar collector using Sysltherm-800 and Therminol-VP1 non-metallic nanofluids, Therm. Sci. Eng. Prog., 43, 101951 (2023).
https://doi.org/10.1016/j.tsep.2023.101951
Cascetta, M., Petrollese, M., Oyekale, J. and Cau, G., Thermocline vs. two-tank direct thermal storage system for concentrating solar power plants: A comparative techno-economic assessment, Int. J. Energy Res., 45, 17721–17737 (2021).
https://doi.org/10.1002/er.7005
Eastman, J. A., Choi, U. S., Li, S., Thompson, L. J. and Lee, S., Enhanced Thermal Conductivity through the Development of Nanofluids, MRS Online Proc. Libr., 457, 3–11 (1996).
https://doi.org/10.1557/PROC-457-3
Esmaeili, Z., Akbarzadeh, S., Rashidi, S. and Valipour, M.S., Effects of hybrid nanofluids and turbulator on efficiency improvement of parabolic trough solar collectors, Eng. Anal. Bound. Elem., 148, 114–125 (2023).
https://doi.org/10.1016/j.enganabound.2022.12.024
Ghasemi, S. E. and Ranjbar, A. A., Effect of using nanofluids on efficiency of parabolic trough collectors in solar thermal electric power plants, Int. J. Hydrogen Energy, 42, 21626–21634 (2017).
https://doi.org/10.1016/j.ijhydene.2017.07.087
Gil, A., Medrano, M., Martorell, I., Lázaro, A., Dolado, P., Zalba, B. and Cabeza, L. F., State of the art on high temperature thermal energy storage for power generation, Renew. Sustain. Energy Rev., 14(1), 31–55 (2010).
https://doi.org/10.1016/j.rser.2009.07.035
Heyhat, M. M., Valizade, M., Abdolahzade, S. and Maerefat, M., Thermal efficiency enhancement of direct absorption parabolic trough solar collector (DAPTSC) by using nanofluid and metal foam, Energy, 192, 116662 (2020).
https://doi.org/10.1016/j.energy.2019.116662
Huang, W. and Marefati, M., Energy, exergy, environmental and economic comparison of various solar thermal systems using water and Thermia oil B base fluids, and CuO and Al₂O₃ nanofluids, Energy Rep., 6, 2919–2947 (2020).
https://doi.org/10.1016/j.egyr.2020.10.021
Kuravi, S., Trahan, J., Goswami, D. Y., Rahman, M. M. and Stefanakos, E. K., Thermal energy storage technologies and systems for concentrating solar power plants, Prog. Energy Combust. Sci., 39(4), 285–319 (2013).
https://doi.org/10.1016/j.pecs.2013.02.001
Loni, R., Askari Asli-Ardeh, E., Ghobadian, B., Kasaeian, A. B. and Bellos, E., Thermal performance comparison between Al₂O₃/oil and SiO₂/oil nanofluids in cylindrical cavity receiver based on experimental study, Renew. Energy, 129, 652–665 (2018).
https://doi.org/10.1016/j.renene.2018.06.029
Mahian, O., Kianifar, A., Kalogirou, S. A., Pop, I. and Wongwises, S., A review of the applications of nanofluids in solar energy, Int. J. Heat Mass Trans., 57(2), 582–594 (2013).
https://doi.org/10.1016/j.ijheatmasstransfer.2012.10.037
Rajagopal, M., Upcycling end-of-life EV batteries into modular latent heat storage units for sustainable district heating, Next Res., 2, 100819 (2025).
https://doi.org/10.1016/j.nexres.2025.100819
Rajendran, D. R., Sundaram, E. G. and Jawahar, P., Experimental studies on the effect of enhanced thermal conductivity of SiC+water nanofluid in the performance of small scale solar parabolic dish receiver, Int. J. Nanosci., 17, 1760025 (2018).
https://doi.org/10.1142/S0219581X17600250
Ram, S., Ganesan, H., Saini, V. and Kumar, A., Performance assessment of a parabolic trough solar collector using nanofluid and water based on direct absorption, Renew. Energy, 214, 11–22 (2023).
https://doi.org/10.1016/j.renene.2023.06.016
Saidur, R., Leong, K. Y. and Mohammad, H. A., A review on applications and challenges of nanofluids. Renew. Sustain. Energy Rev., 15(3), 1646–1668 (2011).
https://doi.org/10.1016/j.rser.2010.11.035
Suresh, S., Venkitaraj, K. P., Selvakumar, P., and Chandrasekar, M., Synthesis of Al2O3–Cu/water hybrid nanofluids using two-step method and its thermo-physical properties. Colloids Surf. A Physicochem. Eng. Asp., 388(1–3), 41–48 (2012).
https://doi.org/10.1016/j.colsurfa.2011.08.005
Taylor, R. A., Phelan, P. E., Otanicar, T. P., Walker, C. A., Nguyen, M., Trimble, S. and Prasher, R., Applicability of nanofluids in high flux solar collectors, J. Renew. Sustain. Energy, 3, 023104 (2011).
https://doi.org/10.1063/1.3571565
Xiong, Q., Hajjar, A., Alshuraiaan, B., Izadi, M., Altnji, S. and Shehzad, S. A., State-of-the-art review of nanofluids in solar collectors: A review based on the type of the dispersed nanoparticles, J. Clean. Prod., 310, 127528 (2021).
