Environmentally Sustainable Optimization of Plasma Spray Technique for Chromium Oxide Coatings on SS306 Steel
J. Environ. Nanotechnol., Volume 14, No 3 (September 2025) pp. 205-214
Abstract
This study investigates the plasma spray coating of chromium oxide nanoparticles (nCr2O3) on SS306 stainless steel substrates to enhance surface performance, addressing the growing demand for elevated-temperature, wear resilience coatings in engineering uses. Utilizing a Taguchi L9, the impact of key process parameters, viz., plasma arc current (PAC), plasma gas flow rate (PGFR), carrier gas flow rate (CGFR), and spray distance (SD), were optimized using desirability function. ANOVA test revealed SD as the most influential factor for micro-Vickers hardness (p = 0.0027) and % porosity (p = 0.0109). Optimal parameters (PAC = 500 A, PGFR = 40 L/min, CGFR = 2 L/min, SD = 100 mm) resulted in a maximum predicted hardness of 726.58 HV and minimum porosity of 3.24%. A confirmation trial showed a 1.27% increase in hardness and a 4.52% reduction in porosity over predicted values. Formation of a dense, homogenous coating with minimal surface defects was confirmed by SEM analysis. The integration of nCr2O3 with optimized process parameters significantly enhances coating quality through improved particle melting, splat formation, and grain boundary strengthening.
Full Text
Reference
Abbas, R. A., Ajeel, S. A., Bash, M. A. A. and Kadhim, M. J., Effect of Plasma Spray Distance on the Features and Hardness Reliability of YSZ Thermal Barrier Coating, Mater. Today Proc., 42, 2553–2560 (2021).
https://doi.org/10.1016/j.matpr.2020.12.578
Bolelli, G., Steduto, D., Kiilakoski, J., Varis, T., Lusvarghi, L. and Vuoristo, P., Tribological Properties of Plasma Sprayed Cr2O3, Cr2O3–TiO2, Cr2O3–Al2O3 and Cr2O3–ZrO2 Coatings, Wear., 480–481, 203931(2021).,
https://doi.org/10.1016/j.wear.2021.203931.
Cai, Z., Deng, S., Liao, H., Zeng, C. and Montavon, G., The Effect of Spray Distance and Scanning Step on the Coating Thickness Uniformity in Cold Spray Process, J. Therm. Spray Technol., 23(3), 354–362(2014).
https://doi.org/10.1007/s11666-013-0002-0
Cellard, A., Garnier, V., Fantozzi, G., Baret, G. and Fort, P., Wear Resistance of Chromium Oxide Nanostructured Coatings, Ceram. Int., 35(2), 913–916(2009).
https://doi.org/10.1016/j.ceramint.2008.02.022
Chafjiri, Z. S., Zadeh, A. A., Seraj, R. A. and Azarniya, A., Effect of Cold Spray Processing Parameters on the Microstructure, Wear, and Corrosion Behavior of Cu and Cu–Al2O3 Coatings Deposited on AZ31 Alloy Substrate, Results Eng., 20, 101594(2023).
https://doi.org/10.1016/j.rineng.2023.101594
Chakravarthy, V. V. K., Rajmohan, T., Vijayan, D. and Palanikumar, K., Application of Grey-ANFIS System to Optimize the Drilling Characteristics of Nano SiC Reinforced Al Matrix Composites, Int. J. Interact. Des. Manuf., 17(6), 3117–3131(2023),
https://doi.org/10.1007/s12008-023-01328-2
Chate, G. R., Kulkarni, R. M., Nikhil, R., Chate, V. R., Patel G. C. M., Sollapur, S. and Shettar, M., Ceramic Material Coatings: Emerging Future Applications, Adv. Ceram. Coat. Emerging Appl., xxxx, 3–17(2023).
https://doi.org/10.1016/B978-0-323-99624-2.00007-3
Chinnusamy, S., Ramasamy, V., Venkatajalapathy, S., Kaliyannan, G. V. and Palaniappan, S. K., Experimental Investigation on the Effect of Ceramic Coating on the Wear Resistance of Al6061 Substrate, J. Mater. Res. Technol., 8(6), 6125–6133(2019).
https://doi.org/10.1016/j.jmrt.2019.10.007
Deng, J., Li, C., Zhao, H., Xie, Z., Li, B. and He, J., Preparation and Tribological Performance of the Plasma-Sprayed TiWN Nano-Composite Coatings, Constr. Build. Mater., 463, 140159(2025).
https://doi.org/10.1016/j.conbuildmat.2025.140159
Du, F., He, L., Huang, H., Zhou, T. and Wu, J., Analysis and Multi-Objective Optimization for Reducing Energy Consumption and Improving Surface Quality during Dry Machining of 304 Stainless Steel, Mater., 13(21), 4693(2020).
https://doi.org/10.3390/ma13214693
Factor, M. and Roman, I., Vickers Microindentation of WC–12%Co Thermal Spray Coating, Surf. Coat. Technol., 132(1), 65–75(2000).
https://doi.org/10.1016/S0257-8972(00)00739-8
Feng, L., Xianliang, J., Yueguang, Y., Keli, Z., Xianjing, R. and Zhenduo, L., Preparation and Characterization of Plasma-Sprayed Ultrafine Chromium Oxide Coatings, Plasma Sci. Technol., 9(1), 35–38(2007).
https://doi.org/10.1088/1009-0630/9/1/08
Hango, S. I., Cornish, L. A., Merwe, J. W. V. D. and Chown, L. H., Corrosion Behaviour of a Cr2O3 Coating on Mild Steel in Synthetic Mine Water, Int. J. Corros., 2024, 1–10(2024).
https://doi.org/10.1155/2024/6343114
Hervy, T., Alroy, R. J., Björklund, S., Yao, Y., Genois, R. and Joshi, S., Evaluation of High-Throughput Columnar YSZ Thermal Barrier Coatings Deposited via Axial Plasma Spraying of Aqueous Solution Precursors, Surf. Coat. Technol., 509, 132214(2025).
https://doi.org/10.1016/j.surfcoat.2025.132214
Huang, D., Xue, D. L., Li, S., Niu, Y. S., Bao, Z. B., Zhu, S. L. and Wang, F. H., Performance and Failure Mechanism of Suspension Plasma-Sprayed Thermal Barrier Coatings on Smooth β-(Ni,Pt)Al Bondcoat, Ceram. Int., 51(19), 28337–28350(2025).
https://doi.org/10.1016/j.ceramint.2025.04.048
Jiang, J., Cui, X., Ma, G., Jin, G., Zheng, W., Liu, Y., Liu, S., Liu, M. and Wang, H., Effect of High-Temperature Oxidation on Plasma Enhanced High-Velocity Arc Spraying Inconel 625-Al2O3 Composite Coating, Appl. Surf. Sci., 710, 164012(2025).
https://doi.org/10.1016/j.apsusc.2025.164012
Kar, S., Bandyopadhyay, P. P. and Paul, S., Effect of Arc–Current and Spray Distance on Elastic Modulus and Fracture Toughness of Plasma-Sprayed Chromium Oxide Coatings, Frict., 6(4), 387–394(2018).
https://doi.org/10.1007/s40544-017-0166-6
Kebriyaei, A., Rahimipour, M. R. and Razavi, M., Solution Medium Suspension Plasma Spray (SMSPS): A Microstructure and High-Temperature Properties Analysis of YSZ Thermal Barrier Coating, J. Therm. Spray Technol., 33(7), 2395–2407(2024).
https://doi.org/10.1007/s11666-024-01848-7
Kengesbekov, A., Influence of Plasma Arc Current and Gas Flow on the Structural and Tribological Properties of TiN Coatings Obtained by Plasma Spraying, Coat., 14(11), 1404(2024).
https://doi.org/10.3390/coatings14111404
Kiilakoski, J., Trache, R., Björklund, S., Joshi, S. and Vuoristo, P., Process Parameter Impact on Suspension-HVOF-Sprayed Cr2O3 Coatings, J. Therm. Spray Technol., 28(8), 1933–1944(2019).
https://doi.org/10.1007/s11666-019-00940-7
Lakkannavar, V., Yogesha, K. B., Prasad, C. D., Phanden, R. K., Srinivasa, G. and Prasad, S. C., Thermal Spray Coatings on High-Temperature Oxidation and Corrosion Applications – A Comprehensive Review, Results Surf. Interfaces., 16, 100250(2024).
https://doi.org/10.1016/j.rsurfi.2024.100250
Liu, M., Tan, Z., Zhao, Y., Wang, H., Zhang, S., Ma, R., Jiang, T., Ma, Z., Zhong, N. and Li, W., Optimization of Spray Parameters and Corrosion Properties of Plasma-Sprayed Cr2O3 Coatings Using Response Surface Methodology, Cryst., 15(4), 377(2025).
https://doi.org/10.3390/cryst15040377
Manojkumar, P., Kalyani, B., Lakshmi, D. V., Krishna, L. R. and Sivakumar, G., Realizing Wear-Resistant Cr2O3 Coatings Using Finer Feedstock: Role of Diverse Plasma Spray Torch Configurations, Ceram. Int., 51(18), 25960–25967(2025).
https://doi.org/10.1016/j.ceramint.2025.03.279
Mao, L., Xiao, J., Sun, G., Wei, X., Wu, D., Cao, P. and Zhang, C., Microstructure and Wear Behaviors of Cr2O3-Al2O3 Composite Coatings Deposited by Atmospheric Plasma Spraying, Surf. Coat. Technol., 444, 128619(2022).
https://doi.org/10.1016/j.surfcoat.2022.128619
Martin, D. T., Rad, M. R., McDonald, A. and Hussain, T., Beyond Traditional Coatings: A Review on Thermal-Sprayed Functional and Smart Coatings, J. Therm. Spray Technol., 28(4), 598–644(2019).
https://doi.org/10.1007/s11666-019-00857-1
Mohankumar, A., Duraisamy, T., Sampathkumar, D., Ranganathan, S., Balachandran, G., Kaliyamoorthy, M., Mariappan, M. and Mulugeta, L., Optimization of Cold Spray Process Inputs to Minimize Porosity and Maximize Hardness of Metal Matrix Composite Coatings on AZ31B Magnesium Alloy, J. Nanomater., 2022(1), 7900150(2022).
https://doi.org/10.1155/2022/7900150
Morelli, S., Bursich, S., Bolelli, G., Puddu, P., Rossi, E., Mecca, F. G., Bortolotti, L. and Lusvarghi, L., Thermal Conductivity and Micromechanical Properties of Plasma-Sprayed Yttria-Stabilized Zirconia Thermal Barrier Coatings, Surf. Coat. Technol., 513, 132498(2025).
https://doi.org/10.1016/j.surfcoat.2025.132498
Nie, X., Su, H., Zhou, Y., Zhang, Z., Xu, J., Dosta, S., Rusinov, P. and Zhang, C., Effect of Hydrogen Flow Rate on Microstructure and Tribological Properties of Atmospheric Plasma Sprayed BN-Mo-NiCr Coatings, Surf. Coat. Technol., 512, 132384(2025).
https://doi.org/10.1016/j.surfcoat.2025.132384
Odhiambo, J. G., Li, W., Zhao, Y. and Li, C., Porosity and Its Significance in Plasma-Sprayed Coatings, Coat., 9(7), 460(2019).
https://doi.org/10.3390/coatings9070460
Pannerselvam, R., Design and Analysis of Experiments, PHI Learning, 1-576 (2012).
Patel, G. C. M., Pradeep, N. B., Girisha. L., Harsha, H. M., Shettigar, A. K., Experimental Analysis and Optimization of Plasma Spray Parameters on Microhardness and Wear Loss of Mo-Ni-Cr Coated Super Duplex Stainless Steel, Aust. J. Mech. Eng., 20(5), 1426–1438(2022).
https://doi.org/10.1080/14484846.2020.1808760
Prashar, G., Thakur, K., Singh, S., Singh, P. and Kumar, S., Microstructural Characterization of Plasma Sprayed Chromium Oxide Coating on SS-310 Steel, AIP Conf. Proc., 2986, 020001(2024).
https://doi.org/10.1063/5.0192481
Samal, S., Zeman, J., Habr, S., Pacherová, O., Chandra, M., Kopeček, J. and Šittner, P., Evaluation of Microstructure–Porosity–Hardness of Thermal Plasma-Sprayed NiTi Coating Layers, J. Manuf. Mater. Process., 7(6), 198(2023).
https://doi.org/10.3390/jmmp7060198
Schino, A. D., Manufacturing and Application of Stainless Steels, MDPI – Multidiscip. Digital Publ. Inst., 10(3), 327(2020).
https://doi.org/10.3390/met10030327
Shabani, C. Z., Abdollah-zadeh, A., Seraj, R. A., Azarniya, A., Effect of Cold Spray Processing Parameters on the Microstructure, Wear, and Corrosion Behavior of Cu and Cu–Al2O3 Coatings Deposited on AZ31 Alloy Substrate, Results Eng., 20, 101594 (2023).
https://doi.org/10.1016/j.rineng.2023.101594
Sun, X., Zhang, W., Shang, X., Chen, S., Song, C. and Zhang, L., Microstructure, Reaction Mechanism, and Properties of in-Situ Submicron TiC and Nano-TixO Particle-Reinforced Cu-Based Composite Coatings Prepared through Simultaneous Solid-Solid and Solid-Gas Reactive Plasma Spraying, Surf. Interfaces., 72, 107138(2025).
https://doi.org/10.1016/j.surfin.2025.107138
Thilagashanthi, T., Gunasekaran, K. and Satyanarayanan, K. S., Microstructural Pore Analysis Using SEM and ImageJ on the Absorption of Treated Coconut Shell Aggregate, J. Clean. Prod., 324, 129217(2021).
https://doi.org/10.1016/j.jclepro.2021.129217
Thirugnanasambandam, A., Gupta, M. and Mariyadas, A., Corrosion Resistance and Wear Response of Plasma Spray Nano-Ceramic Composite Coatings on AZ91D Alloy, J. Mater. Eng. Perform., 34(13), 12469–12484(2025).
https://doi.org/10.1007/s11665-024-10021-8
Vakili, M., Koutník, P., Kohout, J. and Gholami, Z., Analysis, Assessment, and Mitigation of Stress Corrosion Cracking in Austenitic Stainless Steels in the Oil and Gas Sector: A Review, Surf., 7(3), 589–642(2024).
https://doi.org/10.3390/surfaces7030040
Vaßen, R., Kalfhaus, T., Vorkötter, C., Sohn, Y. J., Conze, S. and Berger, L. M., Atmospheric Plasma Spraying of Different MgO/Al2O3 Feedstocks, J. Therm. Spray Technol., 32(2-3), 514–522(2023).
https://doi.org/10.1007/s11666-023-01541-1
Xiong, W., Ma, M., Zhang, J. and Lian, Y., The Effects of Cr2O3 Particles on the Microstructure and Wear-Resistant Properties of Electrodeposited CoNiP Coatings, Surf. Coat. Technol., 381, 125167(2020).
https://doi.org/10.1016/j.surfcoat.2019.125167
Zhang, J. T., Analysis of Variance for Functional Data; Chapman & Hall/CRC Monographs on Statistics and Applied Prob Series, 1st Ed., CRC Press LLC, 1-412(2024).
https://doi.org/10.1201/b15005
Zhou, C., Gong, C., Liu, Q., Hao, Z., Xu, Z. and Tian, X., Research on Micro-Nanoscale SiCp/6061Al Composite Coating Using High-Pressure Cold Spray, J. Therm. Spray Technol., 33(8), 2815–2826(2024).
https://doi.org/10.1007/s11666-024-01880-7
Zhou, C., Gong, C., Xu, Z., Liang, T., Liu, Q., Liu, Y., Hao, Z., Lin, C., Liu, J. and Tian, X., Effect of Solution Treatment on Hardness and Tribological Properties of Micro-Nano SiCp/6061Al Coatings Fabricated by Cold Spray, J. Manuf. Processes., 149, 697–708(2025).
