Development of High-performance Peepal Fiber/Epoxy Composites with ZrO₂ Nanofiller for Structural Applications
J. Environ. Nanotechnol., Volume 14, No 3 (September 2025) pp. 354-363
Abstract
Natural fiber reinforced polymer composites are increasingly favored for applications in both commercial and residential environments. This study seeks to improve the mechanical properties of peepal (P) fiber and epoxy resin (E) composites through the incorporation of zirconium oxide (ZrO2) nanoparticles as a filler. The composites were fabricated using the compression molding process, with the filler used at varying amounts (0 wt%, 1 wt%, 3 wt%, 5 wt%, 7 wt%). Tensile, hardness, and impact tests were performed on the fabricated composites. The mechanical properties, including tensile strength, impact resistance, and hardness were enhanced in the S1 composite. The uniform dispersion of ZrO2 nanoparticles and their enhancement of load transfer between the epoxy matrix and peepal fiber were the principal factors contributing to the improvement in hardness and strength. Infrared spectroscopy validated the beneficial effects of alkaline treatment on the peepal fiber. This experimental study seeks to improve peepal-epoxy composites through the use of fillers, aiming to produce lightweight and highly durable components for aerospace and automotive industries. Scanning electron microscopy was employed to analyze the fracture surfaces.
Full Text
Reference
Abdelhussein, A., Yang, G., Almasi, M. J., Li, L. and Al-Abboodi, H., Employing a novel carbon fiber/epoxy and date seed powder composition to improve the tribological and mechanical properties, J. Compos. Mater., 59(24), 00219983251341069(2025).
https://doi.org/10.1177/00219983251341069
Alhotan, A., Yates, J., Zidan, S., Haider, J. and Silikas, N., Flexural strength and hardness of filler-reinforced pmma targeted for denture base application, Mater., 14(10), 2659 (2021).
https://doi.org/10.3390/ma14102659
Arivendan, A., Jebas, T. W. J., Irulappasamy, S. and Chris, B., Egg shell powder extraction and its application for water hyacinth (Eichhornia crassipes) natural fibre polymer composite mechanical, thermal behaviour and characterization analysis: Aquatic waste into sustainable product, Proce. Inst. Mech. Eng. Part L: J. Mater. Des. Appl., 236(5), 950–962(2022).
https://doi.org/10.1177/14644207211064419
Biswas, B., Hazra, B., Sinha, A. and Majumdar, A., Effect of incorporation of sub-micronic zirconia particles on the mechanical and thermal behaviour of alkali-treated jute fibre-reinforced epoxy composites, Mater. Sci. Technol., 02670836251340767(2025).
https://doi.org/10.1177/02670836251340767
Gowrishankar, R., Sithar, S. P. M., Narayana, K. S., Raja, T., Gokul, R. and Mayakannan, S., Design and Optimization of a Biocompatible Polyethylene Composite with Nelumbo Nucifera Fiber and Nano-banana Peel Filler for Sustainable Environmental Applications, J. Environ. Nanotechnol., 14(1), 306–322(2025).
https://doi.org/10.13074/jent.2025.03.2441019
Hariharan, G., Krishnamachary, P. C., Binoj, J. S. and Mansingh, B. B., Influence of SiC Nanoparticles Reinforcement in Areca/Tamarind Hybrid Biopolymer Composites: Thermo-mechanical, Tribological and Morphological Features, J. Bionic Eng., 20(4), 1723–1736(2023).
https://doi.org/10.1007/s42235-023-00341-1
Hui, J. L. C., Azman, F. F. and Baini, R., Physico-mechanical and morphological properties of rice husk-coconut husk fiber reinforced epoxy composites, Malaysian J. Fundam. Appl. Sci., 16(4), 437–443(2020).
https://doi.org/10.11113/mjfas.v16n4.1945
Islam, T., Hossain, S., Jalil, M. A., Mujahid, S. M. Z., Bhoumik, T. K. and Mahmud, R. U., Development of Reinforced Polyester Hybrid Composites Using Varied Ratios of Jack Tree and Jute Fibers with Eggshell Filler, Mech. Compos. Mater., 60(4), 817–830(2024).
https://doi.org/10.1007/s11029-024-10228-9
Jangir, A., Samal, P. P., Jangir, A. K., Dey, B. and Dey, S., Exploring Ficus religiosa inflorescence powder as an eco-friendly and sustainable solution for the removal of crystal violet with a disposal solution, Environ.l Monitor. Assess., 196(8) (2024).
https://doi.org/10.1007/s10661-024-12866-x
Jose, S., George, J. S., Jacob, T. A., Vijayan P, P., Bhanu A. V, A., Nedumpillil, N. N. and Thomas, S., Nanosilica incorporated coarse wool-epoxy hybrid biocomposites with improved physico-mechanical properties, Front. Mater., 10, 1140602(2023).
https://doi.org/10.3389/fmats.2023.1140602
Kandavalli, S. R., Sundramurthy, V. P., Krishnasamy, V. D., Prasad, G. N. R., Kasi, U. K., Rajesh, S., Kumar, B. R., Selvaraju, M., Kadaikunnan, S. and Khaled, J. M., Bioresin based hybrid green composite preparation using Holoptelea integrifolia fibers reinforced by Ziziphus jujuba seed particles: a fuzzy logic assisted optimization of mechanical behaviour, Zeitschrift Fur Physikalische Chemie, 239(5), 747–772(2025).
https://doi.org/10.1515/zpch-2024-0837
Krishna, P. S., Muthukrishnan, S., Duraisamy, P. and Duraisamy, V., Influence of stacking sequence and nano-silica fortification on the physical properties of veli karuvelam - Peepal hybrid natural composites, Inter. Polym. Proce., 39(4), 441–452(2024).
https://doi.org/10.1515/ipp-2024-0022
Krishnasamy, B., Thirugapillai, P., Rajakannu, A. and Selvaraju, M., Optimization and multi-objective analysis of tensile, flexural and impact strength in nano-hybrid bio-composites reinforced with Helicteres isora, Holoptelea integrifolia fibers, and nanographene, Revista Materia, 30, e20240864 (2025).
https://doi.org/10.1590/1517-7076-RMAT-2024-0864
Kumar, R., Ganguly, A., Purohit, R. and Alla, N., Mechanical, Physical, Morphology and Properties of Multi-Functional Natural fiber and nano SiO2 Reinforced Epoxy Hybrid Composite, Ind. J. Eng.and Mater. Sci., 30(2), 323–330(2023).
https://doi.org/10.56042/ijems.v30i2.599
Kumar, S., Das, R. and Parida, S. K., Evaluation of Mechanical Properties of Sabai Grass (Eulaliopsis binata) Fibers and Epoxy Resin Composite Laminates Using Fly Ash as Filler Material, J. Compos. Sci., 9(1), 38(2025).
https://doi.org/10.3390/jcs9010038
Kumar, S. S. and Raja, V. M., Processing and determination of mechanical properties of Prosopis juliflora bark, banana and coconut fiber reinforced hybrid bio composites for an engineering field, Compos. Sci. Technol., 208, 108695(2021).
https://doi.org/10.1016/j.compscitech.2021.108695
Mahapatra, S. K. and Satapathy, A., Processing and physico-mechanical characterization of sponge iron slag filled ramie fiber reinforced epoxy-based composites, Polym. Compos., 43(9), 6191–6203(2022).
https://doi.org/10.1002/pc.26923
Manickaraj, K., Karthik, A., Palanisamy, S., Jayamani, M., Ali, S. K., Sankar, S. L. and Al-Farraj, S. A., Improving Mechanical Performance of Hybrid Polymer Composites: Incorporating Banana Stem Leaf and Jute Fibers with Tamarind Shell Powder, BioRes., 20(1), 1998–2025(2025).
https://doi.org/10.15376/biores.20.1.1998-2025
Mehto, A. and Shukla, P., Bioimaging potential: Comparative study of ZnO nanoparticles synthesized via green and chemical routes, Next Nanotechnol., 7, 100118(2025).
https://doi.org/10.1016/j.nxnano.2024.100118
Mohit, H., Sanjay, M. R., Siengchin, S., Kanaan, B., Ali, V., Alarifi, I. M. and El-Bagory, T. M. A. A., Machine learning-based prediction of mechanical and thermal properties of nickel/cobalt/ferrous and dried leaves fiber-reinforced polymer hybrid composites, Polym. Compos., 45(1), 489–506(2024).
https://doi.org/10.1002/pc.27793
Muthalagu, R., Srinivasan, V., Sathees Kumar, S. and Krishna, V. M., Extraction and Effects of Mechanical Characterization and Thermal Attributes of Jute, Prosopis Juliflora Bark and Kenaf Fibers Reinforced Bio Composites Used for Engineering Applications, Fib. Polym., 22(7), 2018–2026(2021).
https://doi.org/10.1007/s12221-021-1092-9
Nair, R., Bhattacharya, A., Bhowmik, P. and Kant, R., Effect of surface modification on mechanical properties of filature silk waste and nanoclay filler-based polymer matrix composite, Polym. Polym. Compos., 29(9_suppl), S696–S706(2021).
https://doi.org/10.1177/09673911211023043
Ponnuswamy, M., Sathishkumar, T. P., Selvaraju, M. and Sundramurthy, V. P., Enset ventricosum Fibre-Based Biocomposite Preparation with Wood Apple Shell Particles as a Filler: Effect of Alkali Treatment and Optimization of Composition for Physio-Mechanical Properties, Arabian J. Sci. Eng., 49(11), 15733–15748(2024).
https://doi.org/10.1007/s13369-024-09253-6
Raja, T., Al-Otibi, F. O., Alharbi, R. I., Mohanavel, V., Velmurugan, P., Karthikeyan, S., Perumal, M. and Basavegowda, N., A novel study of biological and structural analysis on Cissus quadrangularis fiber-reinforced CaO particulates epoxy composite for biomedical application, J. Mater. Res. Technol., 27, 692–702(2023).
https://doi.org/10.1016/j.jmrt.2023.09.302
Raja, T. and Devarajan, Y., Mechanical and thermal stability of Millettia pinnata fibre-reinforced ZrO2 nanofiller particulates polyester composite — an experimental study, Biomass Convers. Biorefine., 14(19), 24041–24048(2024).
https://doi.org/10.1007/s13399-023-04837-y
Siddiqui, M. A. S., Rabbi, M. S. and Rahman, M. T., An experimental review on enhancing the low and high-velocity impact resistance of NFCs through nanoparticle reinforcement, J. Reinforce. Plastics Compos., 44(17-18), 27316844241240569(2024).
https://doi.org/10.1177/07316844241240569
Song, H., Liu, T., Gauvin, F. and Brouwers, H. J. H., Evaluation of zirconia modification on the durability of natural fiber-reinforced cement composites using accelerated aging, J. Build. Eng., 84, 108632(2024).
https://doi.org/10.1016/j.jobe.2024.108632
Srinivasan, R. and Jayaraman, M., Effect of layering sequence and jujube fruit seed addition on the mechanical, water absorption and bio-degradation properties of Indian almond/peepal hybrid composites, Mater. Res. Exp., 11(9), 095301(2024).
https://doi.org/10.1088/2053-1591/ad6ff6
Sumesh, K. R., Kavimani, V., Rajeshkumar, G., Indran, S. and Khan, A., Mechanical, water absorption and wear characteristics of novel polymeric composites: Impact of hybrid natural fibers and oil cake filler addition, J. Ind. Tex., 51(4), 5910S-5937S(2022).
https://doi.org/10.1177/1528083720971344
Velmurugan, D., Jayakumar, J., Bovas, H. B. A. and Raj, J. B., Experimental Investigation on the Mechanical Properties of Hybrid Composites Made with Banyan and Peepal Fibers, J. Nat. Fib., 19(16), 14183–14194(2022).
https://doi.org/10.1080/15440478.2022.2117260
Xavier, X. R., Suderson, K., Viswanath, K. and Velmurugan, D., Experimental investigation on the mechanical and wear behavior of epoxy/Indian almond/peepal hybrid composites, Int. Polym. Proce., 39(2), 273–283(2024).
https://doi.org/10.1515/ipp-2023-4440
Xiao, X., Lu, S., Qi, B., Zeng, C., Yuan, Z. and Yu, J., Enhancing the thermal and mechanical properties of epoxy resins by addition of a hyperbranched aromatic polyamide grown on microcrystalline cellulose fibers, RSC Adv., 4(29), 14928–14935(2014).
https://doi.org/10.1039/c3ra45732j
Xu, L., Deng, Z., Wang, Y., Ma, D., Liu, B., Zhang, G., Wang, X., Zhu, L. and Xu, D., High strength, excellent thermal stability and thermal insulation performance of ZrO2-mullite composite fiber papers with nacre-mimetic layered structures, Ceram. Int., 50(9), 14520–14528 (2024).
https://doi.org/10.1016/j.ceramint.2024.01.365
Yadav, V., Tak, S. S., Singh, H. and Daga, K., Biosynthesis of Silver Nanoparticles using a Mixed Aqueous Extract Of Ficus Religiosa Bark, Leaf, And Root: Free Radical Interactions And Antibacterial Evaluation, Rasayan J. Chem., 18(1), 538–545(2025).
