Open Access

Performance Evaluation of Self-compacting Concrete Incorporating Glass Fibers and Nanomaterials

N. Devendran, nmdev24@gmail.com
Department of Civil Engineering, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai, TN, India
T. S. Lakshmi, lakshmits.sse@saveetha.com
Department of Civil Engineering, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai, TN, India
A. Kandasamy asohankandasamy@gmail.com
Department of Civil Engineering, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai, TN, India
ORCID



J. Environ. Nanotechnol., Volume 14, No 3 (September 2025) pp. 623-634

https://doi.org/10.13074/jent.2025.09.2531664

PDF


Abstract

This study investigates the role of nano silica and Cem FIL Anti Crack HD glass fibers in enhancing the performance of Self Compacting Concrete (SCC). Although SCC possesses excellent workability, its tensile and flexural strengths remain relatively low compared to its compressive strength. To address this limitation, a modified mix designated as Glass Fiber and Nano Reinforced SCC (GFNSCC) was prepared and compared with conventional SCC. The experimental results showed a clear improvement in mechanical performance. The compressive strength increased from 26.22 to 33.16 N/mm² in SCC to 31.02 to 38.27 N/mm² in GFNSCC, the splitting tensile strength improved from 2.62 to 3.32 N/mm² to 3.10 to 3.83 N/mm², and the flexural strength increased from 3.15 to 3.98 N/mm² to 3.88 to 4.79 N/mm². These results confirm that the combined addition of nano silica and glass fibers provides a synergistic effect, producing significant gains in strength characteristics. The findings highlight the potential of GFNSCC for applications requiring high durability and improved resistance to cracking in complex structural systems.

Full Text

Reference


Afzali, N. O. and Mazloom, M., Effects of colloidal nano-silica on fresh and hardened properties of self-compacting lightweight concrete, J. Build. Eng., 20, 400–410(2018).

https://doi.org/10.1016/j.jobe.2018.08.014

Ahmad, J., Tufail, R. F., Aslam, F., Mosavi, A., Alyousef, R., Faisal, J. M., Zaid, O. and Khan, N. M. S., A Step towards Sustainable Self-Compacting Concrete by Using Partial Substitution of Wheat Straw Ash and Bentonite Clay Instead of Cement, Sustain., 13(2), 824(2021).

https://doi.org/10.3390/su13020824

Al-Mughanam, T., Aldhyani, T. H. H., Alsubari, B. and Al-Yaari, M., Modeling of Compressive Strength of Sustainable Self-Compacting Concrete Incorporating Treated Palm Oil Fuel Ash Using Artificial Neural Network, Sustain., 12(22), 9322(2020).

https://doi.org/10.3390/su12229322

Azimi-Pour, M., Eskandari, N. H. and Pakzad, A., Linear and non-linear SVM prediction for fresh properties and compressive strength of high volume fly ash self-compacting concrete, Constr. Build. Mater., 230, 117021(2020).

https://doi.org/10.1016/j.conbuildmat.2019.117021

Damodaran, P., Nagarajan, M. and Thangasamy, L. (2024). Assessing the Durability, Mechanical, and Microstructural Properties of Nanosilica-enhanced Coconut Shell Concrete: A Sustainable Approach. J. Environ. Nanotechnol, 13(3), 237-245. doi:

https://doi.org/10.13074/jent.2024.09.243845

De-Prado-Gil, J., Palencia, C., Silva, M. N. and Martínez, G. R., To predict the compressive strength of self compacting concrete with recycled aggregates utilizing ensemble machine learning models, Case Stud. Constr. Mater., 16, e01046(2022).

https://doi.org/10.1016/j.cscm.2022.e01046

Farooq, F., Czarnecki, S., Niewiadomski, P., Aslam, F., Alabduljabbar, H., Ostrowski, K. A., Śliwa-Wieczorek, K., Nowobilski, T. and Malazdrewicz, S., A Comparative Study for the Prediction of the Compressive Strength of Self-Compacting Concrete Modified with Fly Ash, Mater., 14(17), 4934(2021).

https://doi.org/10.3390/ma14174934

Haruna, S. I., Malami, S. I., Adamu, M., Usman, A. G., Farouk, Aib., Ali, S. I. A. and Abba, S. I., Compressive Strength of Self-Compacting Concrete Modified with Rice Husk Ash and Calcium Carbide Waste Modeling: A Feasibility of Emerging Emotional Intelligent Model (EANN) Versus Traditional FFNN, Arab. J. Sci. Eng., 46(11), 11207–11222(2021).

https://doi.org/10.1007/s13369-021-05715-3

Hosseini, P., Afshar, A., Vafaei, B., Booshehrian, A., Molaei Raisi, E. and Esrafili, A., Effects of nano-clay particles on the short-term properties of self-compacting concrete, Eur. J. Environ. Civ. Eng., 21(2), 127–147(2017).

https://doi.org/10.1080/19648189.2015.1096308

Jalal, M., Pouladkhan, A., Harandi, O. F., and Jafari, D., RETRACTED: Comparative study on effects of Class F fly ash, nano silica and silica fume on properties of high-performance self-compacting concrete, Constr. Build. Mater., 9490–104(2015).

https://doi.org/10.1016/j.conbuildmat.2015.07.001

Kandasamy, Ramesh., B., Mahmoud, A. K., Murugan, V. and Karthick, R., Enhanced Durability and Strength of Interlocking Geopolymer Mud Blocks Incorporating Industrial By-products for Sustainable Construction, J. Environ. Nanotechnol., 14(1), 172–180(2025a).

https://doi.org/10.13074/jent.2025.03.2511308

Kandasamy, Priya, P. R., Mahmoud, A. K. and Athiappan, K., Comparative Analysis on Load-deformation Behavior of RC Slabs Incorporating Nano-SiO₂ and Coconut Fibers, J. Environ. Nanotechnol., 14(1), 18–29(2025b).

https://doi.org/10.13074/jent.2025.03.2511233

Mai, H. V. T., Nguyen, M. H., and Ly, H. B., Development of machine learning methods to predict the compressive strength of fiber-reinforced self-compacting concrete and sensitivity analysis, Constr. Build. Mater., 367, 130339(2023).

https://doi.org/10.1016/j.conbuildmat.2023.130339

Mostafa, S. A., Tayeh, B. A., and Almeshal, I., Investigation the properties of sustainable ultra-high-performance basalt fibre self-compacting concrete incorporating nano agricultural waste under normal and elevated temperatures, Case Stud. Constr. Mater., 17, e01453(2022).

https://doi.org/10.1016/j.cscm.2022.e01453

Murali, G., Abid, S. R., Amran, M., Fediuk, R., Vatin, N. and Karelina, M., Combined Effect of Multi-Walled Carbon Nanotubes, Steel Fibre and Glass Fibre Mesh on Novel Two-Stage Expanded Clay Aggregate Concrete against Impact Loading, Cryst., 11(7), 720(2021).

https://doi.org/10.3390/cryst11070720

Pazouki, G., Golafshani, E. M. and Behnood, A., Predicting the compressive strength of self‐compacting concrete containing Class F fly ash using metaheuristic radial basis function neural network, Struct. Concr., 23(2), 1191–1213(2022).

https://doi.org/10.1002/suco.202000047

Revilla-Cuesta, V., Skaf, M., Serrano-López, R. and Ortega-López, V., Models for compressive strength estimation through non-destructive testing of highly self-compacting concrete containing recycled concrete aggregate and slag-based binder, Constr. Build. Mater., 280, 122454(2021).

https://doi.org/10.1016/j.conbuildmat.2021.122454

Saif, M. S., Shanour, A. S., Abdelaziz, G. E., Elsayad, H. I., Shaaban, I. G., Tayeh, B. A. and Hammad, M. S., Influence of blended powders on properties of Ultra-High Strength Fibre Reinforced Self Compacting Concrete subjected to elevated temperatures, Case. Stud. Constr. Mater., 18e, 01793(2023).

https://doi.org/10.1016/j.cscm.2022.e01793

Sabari, K., Muniappan, A., Deepanraj, B. and Mohamed, M. J. S., Enhancing Mechanical Performance of Friction Stir Welded AZ31 Magnesium Alloy with Nano-TiC Reinforcements Using Grey Relational Analysis, Int. J. Precis. Eng. Manuf., 26, 27–41 (2025).

https://doi.org/10.1007/s12541-024-01096-3

Sabari, K., Muniappan, A., Deepanraj, B. and Yuvaperiyasamy, M. Exploring the Effect of TiO₂ Nanoparticles on the Microstructural Dynamics and Mechanical Attributes of Dissimilar FSW Joints Between AA7071 and AZ31, Trans. Indian Inst. Met., 78, 1–10 (2025).

https://doi.org/10.1007/s12666-024-03535-1

Saini, G., and Vattipalli, U., Assessing properties of alkali activated GGBS based self-compacting geopolymer concrete using nano-silica, Case Stud. Constr. Mater., 12, e00352(2020).

https://doi.org/10.1016/j.cscm.2020.e00352

Powered by

Powered by OJS