Nanotechnology Applications in Electric Vehicles: Boosting Energy Efficiency and Minimizing Environmental Impact
J. Environ. Nanotechnol., Volume 14, No 3 (September 2025) pp. 591-598
Abstract
Electric Vehicles (EVs) have become a critical component in global strategies to combat climate change and reduce dependence on fossil fuels. Despite significant advances, EVs still face challenges related to energy storage, limited range, long charging times, and environmental sustainability. Nanotechnology, the science of manipulating materials at the atomic or molecular scale, presents innovative solutions to these challenges. This paper explores how nanotechnology enhances energy efficiency and reduces the environmental impact of EVs. It focuses on advances in battery technologies, lightweight nanomaterials, thermal management, and nanostructured power electronics. Furthermore, it critically assesses the environmental implications of using nanomaterials and provides a roadmap for future research.
Full Text
Reference
Alsaiari, N. S., Alzahrani, F. M., Amari, A., Osman, H., Harharah, H. N., Noureddine Elboughdiri, & Tahoon, M. A., Plant and Microbial Approaches as Green Methods for the Synthesis of Nanomaterials: Synthesis, Applications, and Future Perspectives, Mol., 28(1), 463–463 (2023).
https://doi.org/10.3390/molecules28010463
Balaji, N. K. R., Pratyusha, D., Sravanthi, B., and Jayakiran, R. E., Recent AI Applications in Electrical Vehicles for Sustainability, Int. J. Mech. Eng., 11(3), 50–64 (2024).
https://doi.org/10.14445/23488360/ijme-v11i3p106
Dresselhaus, M. S and Thomas, I. L., Alternative energy technologies, Nat., 414, 332–337 (2001).
https://doi.org/10.1038/35104599
Esiri, A. E., Mensah, J. K., Darlington, E. E., Ogundipe, B. O. and Heavens, A. I., Assessing the environmental footprint of the electric vehicle supply chain, Magna Scientia Adv. Res. Rev., 8(2), 219–227 (2023).
https://doi.org/10.30574/msarr.2023.8.2.0099
Fengbo, W., Jinbao, S. and Tantan, X., Oxide ceramic coatings on orthopaedic implants: A review of TiO2 AND Al2O3, Ceram. Silik., 67(4), 525–542 (2023).
https://doi.org/10.13168/cs.2023.005
Goti, E., Mura, A., Confiengo, G. M. G. D. and Casalegno, V., The tribological performance of super-hard Ta:C DLC coatings obtained by low-temperature PVD, Ceram. Int., 49(24), 40193–40210 (2023).
https://doi.org/10.1016/j.ceramint.2023.09.355
Iravani, S., Green synthesis of metal nano particles using plants. Green Chem., 13(10), 2638–2650 (2011).
https://doi.org/10.1039/c1gc15386b
Mehdi Honarvar Nazari, Yan Zhang, Ali Mahmoodi, Gang Xu, Jiang Yu, Junliang Wu, Xianming Shi, Nanocomposite organic coatings for corrosion protection of metals: A review of recent advances, Progress in Organic Coatings, 162, 2022, 106573.
https://doi.org/10.1016/j.porgcoat.2021.106573.
Janek, J. and Zeier, W. G., A solid future for battery development: The rise of solid-state electrolytes, Nat. Energy, 1, 16141 (2016).
https://doi.org/10.1038/nenergy.2016.141
Kan, J., Optimization of Electrode Materials for Lithium-Ion and Sodium-Ion Batteries in Electric Vehicles, Highlights Sci. Eng. Technol., 121, 619–624 (2024).
https://doi.org/10.54097/xca1qg21
Keller, A. A., McFerran, S., Lazareva, A. and Suh, S., Global life cycle releases of engineered nanomaterials, J. Nanopart. Res., 15(6), 1692 (2013).
https://doi.org/10.1007/s11051-013-1692-4
Khan, N. I. and Halder, S., Self-healing fiber-reinforced polymer composites for their potential structural applications, Self-Healing Polymer-Based Systems, 455–472 (2020).
https://doi.org/10.1016/b978-0-12-818450-9.00015-5
Kardani, S. L., Nanocarrier-based formulations: Regulatory Challenges, Ethical and Safety Considerations in Pharmaceuticals, J. Pharm., 18(02), (2024).
https://doi.org/10.22377/ajp.v18i02.5444
Li, P., Luo, S., Zhang, L., 202, Q., Wang, Y., Lin, Y., Xu, C., Guo, J., Cheali, P. and Xia, X., Progress, challenges, and prospects of spent lithium-ion batteries recycling: A review, J. Energy Chem., 89, 144–171(2024).
https://doi.org/10.1016/j.jechem.2023.10.012
Manthiram, A., A reflection on lithium-ion battery cathode chemistry, Nat. Commun., 11(1), 1550 (2020).
https://doi.org/10.1038/s41467-020-15355-0
Maynard, A. D., Warheit, D. B. and Philbert, M. A., The new toxicology of sophisticated materials: Nano toxicology and beyond, Toxicol. Sci., 120(suppl_1), S109–S129 (2011).
https://doi.org/10.1093/toxsci/kfq372
Malhotra, R., Han, Y. M., Morin, J. L. P., E. K., Luong-Van, Chew, R. J. J., Neto, A. H. C., Nijhuis, C.A. and Rosa, V., Inhibiting Corrosion of Biomedical-Grade Ti-6Al-4V Alloys with Graphene Nanocoating, J. Dent. Res., 99(3), 285–292 (2020).
https://doi.org/10.1177/0022034519897003
Mohanty, A. K., Vivekanandhan, S., Pin, J. M. and Misra, M., Composites from renewable and sustainable resources: Challenges and innovations, Sci., 362(6414), 536–542 (2018).
https://doi.org/10.1126/science.aat9072
Nel., Toxic potential of materials at the nano‑level, Sci., 311(5761), 622–627 (2006).
https://doi.org/10.1126/science.1114397
Naskar, A. K., Keum, J. K. and Boeman, R. G., Polymer matrix nanocomposites for automotive structural components, Nat. Nanotechnol., 11(12), 1026–1030 (2016).
https://doi.org/10.1038/nnano.2016.262
Roco, M. C., Nanotechnology: convergence with modern biology and medicine, Curr. Opin. Biotechnol., 14(3), 337–346 (2003).
https://doi.org/10.1016/S0958-1669(03)00068-5
Sburlan, I. C., Vasile, I. and Tudor, E., Comparative study between semiconductor power devices based on silicon Si, silicon carbide SiC and gallium nitrate GaN used in the electrical system subassembly of an electric vehicle, 2021 Int. Semicond. Conf. (CAS), 107–110 (2021).
https://doi.org/10.1109/cas52836.2021.9604127
Shafique, M. and Luo, X., Nanotechnology in Transportation Vehicles: An Overview of Its Applications, Environmental, Health and Safety Concerns, Mater., 12(15), 2493–2493 (2019).
https://doi.org/10.3390/ma12152493
Tarascon, J. M. and Armand, M., Issues and challenges facing rechargeable lithium batteries, Nat., 414, 359–367 (2001).
https://doi.org/10.1038/35104644
United Nations., transforming our world: the 2030 Agenda for Sustainable Development, (2015).
https://sdgs.un.org/2030agenda
Vahidi, A. and Sciarretta, A., Energy saving potentials of connected and automated vehicles, Transp. Res. Part C: Emerging Technol., 95, 822–843 (2018).
https://doi.org/10.1016/j.trc.2018.09.001
Wang, Y., The application challenge of electric vehicles, Appl. Comput. Eng., 26(1), 86–91(2023).
https://doi.org/10.54254/2755-2721/26/20230800
White, S. R., Sottos, N. R., Geubelle, P. H., Moore, J. S., Kessler, M. R., Sriram, S. R., Brown, E. N. and Viswanathan, S., Autonomic healing of polymer composites, Nat., 409, 794–797 (2001).
https://doi.org/10.1038/35057232
Xu, Y., Innovations in Energy Through Nanomaterials Enhancing Solid-State Battery Safety and Efficacy, Highlights Sci. Eng. Technol., 116, 125–131 (2024).
https://doi.org/10.54097/6p096226
Zhang, L., Wu, H. B. & Lou, X. W., Nanostructured materials for energy conversion and storage and Nano‑structured silicon anodes for advanced lithium‑ion batteries, Adv. Energy Mater., 7, 1300958 (2019).
https://doi.org/10.1002/aenm.201300958
Zheng, W., Diverse Applications of Frontier Nanotechnology in Electric Vehicles, Highlights Sci. Eng. Technol., 121, 510–521 (2024).
