Open Access

Air-powered Innovation: Exploring the Future of Aluminium-Air Batteries

A. Nagamani Prabu, prabhu.spectra@gmail.com
Center for Energy and Nano Research, Department of Physics, Karpagam Academy of Higher Education, Coimbatore, TN, India
L. Yogapriya, yogaece49@gmail.com
Department of Electronics and Communication Engineering, Hindusthan Institute of Technology, Othakkalmandapam, Coimbatore, TN, India
K. Balachander, kaybe.ind@gmail.com
Department of Electrical and Electronics Engineering, Sri Ramakrishna Engineering College, Vattamalipalayam, Coimbatore, TN, India
ORCID
K. Somasundaram somu.ngmc@gmail.com
PG and Research Department of Physics, Nallamuthu Gounder Mahalingam College, Pollachi, TN, India
ORCID



J. Environ. Nanotechnol., Volume 14, No 3 (September 2025) pp. 573-590

https://doi.org/10.13074/jent.2025.09.2531618

PDF


Abstract

This review examines the development of aluminium-air (Al-Air) batteries, a promising alternative to traditional lithium-ion batteries, particularly in sustainable energy storage applications. Al-Air batteries offer significant advantages, including high energy density, low cost, and environmental friendliness, making them ideal for use in electric vehicles, grid infrastructure, and aerospace. The use of abundant and inexpensive aluminium as the anode further reduces production costs, while the eco-friendly nature of these batteries positions them as a greener alternative. However, despite their potential, Al-Air batteries face several challenges that hinder their commercial adoption. Anode corrosion, electrolyte degradation, and limited rechargeability are the primary obstacles. The aluminium anode degrades over time, reducing battery lifespan, and the electrolyte suffers from performance degradation with use. Additionally, the limited rechargeability of Al-Air batteries prevents them from being widely used in applications requiring frequent cycling, such as electric vehicles. Recent advancements in addressing these challenges have been made, including the development of hybrid systems, protective coatings for the anode, and improved electrolytes. Additionally, research into mechanical recharge solutions and enhancements to battery life holds promise for improving the practicality of Al-Air batteries. These advancements could lead to better integration with renewable energy systems and broader commercial adoption in the future.

Full Text

Reference


Buckingham, R., Asset, T. and Atanassov, P., Aluminum-air batteries: A review of alloys, electrolytes and design, J. Power Sources, 498, 229762 (2021).

https://doi.org/10.1016/J.JPOWSOUR.2021.229762

Chen, M., Tian, S., Song, Y., Lu, B., Tang, Y. and Zhou, J., A corrosion-resistant zinc-chromium alloy layer for highly reversible aqueous zinc-ion batteries, J. Cent. South Univ., 31, 4549-4559 (2024b).

https://doi.org/10.1007/s11771-024-5846-6

Chen, P., Yuan, X., Xia, Y., Zhang, Y., Fu, L., Liu, L., Yu, N., Huang, Q., Wang, B., Hu, X., Wu, Y. and Van Ree, T., An Artificial Polyacrylonitrile Coating Layer Confining Zinc Dendrite Growth for Highly Reversible Aqueous Zinc‐Based Batteries, Adv. Sci., 8(11), 2100309 (2021).

https://doi.org/10.1002/advs.202100309

Chen, X., Venezuela, J. and Dargusch, M., The high corrosion-resistance of ultra-high purity Mg-Ge alloy and its discharge performance as anode for Mg-air battery, Electrochim. Acta., 448, 142127 (2023).

https://doi.org/10.1016/j.electacta.2023.142127

Chen, Y., Liu, Y., Du, W., Li, Q., Wang, H., Li, Q., Yang, Q. and Qin, G., Identification of the parameters of the aluminum-air battery with regard to temperature, J. Energy Storage, 88, 111397 (2024a).

https://doi.org/10.1016/j.est.2024.111397

Dilshad, M., Li, T., Lee, S. and Qin, L., Next-Generation Aluminum-Air Batteries: Integrating New Materials and Technologies for Superior Performance, ACS Appl. Energy Mater., 8(6), 3248-3275 (2025).

https://doi.org/10.1021/acsaem.4c02926

Jiang, M., Fu, C., Meng, P., Ren, J., Wang, J., Bu, J., Dong, A., Zhang, J., Xiao, W. and Sun, B., Challenges and Strategies of Low‐Cost Aluminum Anodes for High‐Performance Al‐Based Batteries, Adv. Mater., 34(2), 2102026 (2021).

https://doi.org/10.1002/adma.202102026

Kate, S. R., Kadam, V. S., Kulkarni, V. M., Deokate, J. R., Kale, B. B. and Kalubarme, S. R., Highly stable and nanoporous Na3V2(PO4)3@C cathode material for sodium-ion batteries using thermal management, J. Energy Storage, 74, 109245 (2023).

https://doi.org/10.1016/j.est.2023.109245.

Leong, W. K., Wang, Y., Ni, M., Pan, W., Luo, S. and Leung, D., Rechargeable Zn-air batteries: Recent trends and future perspectives, Renewable Sustainable Energy Rev., 154, 111771 (2022).

https://doi.org/10.1016/j.rser.2021.111771.

Liu, S., Cao, Z., Meng, Y., Li, Y., Yang, W., Chang, Z., Liu, W. and Sun, X., Aerophilic Co-Embedded N-Doped Carbon Nanotube Arrays as Highly Efficient Cathodes for Aluminum-Air Batteries, ACS appl. Mater. Interfaces, 13(23), 26853-26860 (2021).

https://doi.org/10.1021/acsami.1c00837

Liu, X., Jiao, H., Wang, M., Song, W., Xue, J. and Jiao, S., Current progresses and prospects on aluminium–air batteries, Int. Mater. Rev., 67(7), 734 – 764 (2022).

https://doi.org/10.1080/09506608.2021.2006968

Lv, C., Li, Y., Zhu, Y., Zhang, Y., Kuang, J., Huang, D., Tang, Y. and Wang, H., Precipitation-free aluminum-air batteries with high capacity and durable service life, Chem. Eng. J., 462, 142182 (2023).

https://doi.org/10.1016/j.cej.2023.142182

Lv, C., Zhu, Y., Li, Y., Zhang, Y., Kuang, J., Tang, Y., Li, H. and Wang, H. Hydrogen-bonds reconstructing electrolyte enabling low-temperature aluminum-air batteries, Energy Storage Mater., 59, 102756 (2023).

https://doi.org/10.1016/j.ensm.2023.03.034

Rajore, M. S., Kanwade, R. A., Satrughna, K. A. J., Tiwari, K. M. and Shirage, M. P., A comprehensive review on advancements in catalysts for aluminum-air batteries, J. Power Sources, 616, 235101 (2024).

https://doi.org/10.1016/j.jpowsour.2024.235101

Rani, B., Yadav, J. K., Saini, P., Pandey, A. P. and Dixit, A., Aluminum–air batteries: current advances and promises with future directions, RSC Adv., 14(25), 17628–17663 (2024).

https://doi.org/10.1039/D4RA02219J

Sheng, L., Fu, L., Su, L., Shen, H. and Zhang, Z., Method to characterize thermal performances of an aluminum-air battery, Energy, 301, 131757 (2024).

https://doi.org/10.1016/j.energy.2024.131757

Shumiri, M. A. I. M., Najib, A. S. M. and Fadil, N. A., Current status and advances in zinc anodes for rechargeable aqueous zinc-air batteries, Sci. Technol. Adv. Mater., 26(1), 2448418 (2024).

https://doi.org/10.1080/14686996.2024.2448418

Tian, W., Ren, J. and Yuan, Z., In-situ cobalt-nickel alloy catalyzed nitrogen-doped carbon nanotube arrays as superior freestanding air electrodes for flexible zinc-air and aluminum-air batteries, Appl. Catal. B: Environ., 317, 121864 (2022).

https://doi.org/10.1016/j.apcatb.2022.121764

Tong, F., Zhuang, W., Song, M., Kim, J., Gao, W. and Wei, S., Micro-alloyed Aluminium Alloys as Anodes for Aluminium-air Batteries with a Neutral Electrolyte, Mater. Today Commun., 39, 108518 (2024).

https://doi.org/10.1016/j.mtcomm.2024.108518

Wang, W., Yuan, B., Sun, Q. and Wennersten, R., Application of energy storage in integrated energy systems — A solution to fluctuation and uncertainty of renewable energy, J. Energy Storage, 52, 104812 (2022).

https://doi.org/10.1016/j.est.2022.104812

Xi, W., Zhang, J., Zhang, Y., Wang, R., Gong, Y., He, B., Wang, H. and Jin, J., 3D-printed Al metal-organic framework/S cathode with efficient adsorption and redox conversion of polysulfides in lithium-sulfur batteries, J. Mater. Chem. A, 11(14), 7479-7689 (2023).

https://doi.org/10.1039/d2ta09766d

Yang, L., Wu, Y., Chen, S., Xiao, Y., Chen, S., Zheng, P., Wang, J. and Qu, J., A promising hybrid additive for enhancing the performance of alkaline aluminum-air batteries, Mater. Chem. Phys., 257, 123787 (2021a).

https://doi.org/10.1016/j.matchemphys.2020.123787

Yang, L., Wu, Y., Chen, S., Xiao, Y., Chen, S., Zheng, P., Wang, J. and Qu, J., A promising hybrid additive for enhancing the performance of alkaline aluminum-air batteries, Mater. Chem. Phys., 257, 123787 (2021b).

https://doi.org/10.1016/j.matchemphys.2020.123787

Yang, Y., Lin, Z., Hong, Y., Gao, Y., Jiang, T. and Luo, Z., A paper-based microfluidic aluminum–Air battery with intrinsic migration of electrolyte, Appl. Mater. Today, 36, 102003 (2024).

https://doi.org/10.1016/j.apmt.2023.102003

Zhang, H., Guo, R., Li, S., Liu, C., Li, H., Zou, G., Hu, J., Hou, H. and Ji, X., Graphene quantum dots enable dendrite-free zinc ion battery, Nano Energy, 92, 106752 (2022).

https://doi.org/10.1016/j.nanoen.2021.106752

Zhang, Y., Lv, C., Zhu, Y., Kuang, J., Wang, H., Li, Y. and Tang, Y., Challenges and Strategies of Aluminum Anodes for High‐Performance Aluminum–Air Batteries, Small Methods, 8(5), 2300911 (2023).

https://doi.org/10.1002/smtd.202300911

Zhao, C. -X., Yu, L., Liu, J. -N., Wang, J., Yao, N., Li, X. -Y., Chen, X., Li, B. -Q. and Zhang, Q., Working Zinc–Air Batteries at 80°C, Angew. Chem. Int. Ed. Engl., 61(33), e202208042 (2022).

https://doi.org/10.1002/anie.202208042

Zhao, R., He, P., Yu, F., Yang, J., Sun, Z. and Hu, W., Performance improvement for aluminum-air battery by using alloying anodes prepared from commercially pure aluminum, J. Energy Storage, 73, 108985 (2023).

https://doi.org/10.1016/j.est.2023.108985

Zou, C., Chen, L., Liu, Q., Lu, W., Sun, X., Liu, J., Lei, Y., Zhao, W. and Liu, Y., Flexible Aluminum-Air Battery Based on High-Performance Three-Dimensional Dual-Network PVA/KC/KOH Composite Gel Polymer Electrolyte, Langmuir, 40(19), 9999-10007 (2024).

https://doi.org/10.1021/acs.langmuir.4c00159

Powered by

Powered by OJS