Sustainable Thermal Performance Analysis of a Pulsating Heat Pipe Using Zinc Oxide-ethanol Nanofluid
J. Environ. Nanotechnol., Volume 14, No 3 (September 2025) pp. 179-188
Abstract
Enhancing heat transfer efficiency is critical for sustainable thermal management in modern applications such as electronics cooling, solar thermal systems, and waste heat recovery. This study investigates the thermal performance of a pulsating heat pipe (PHP) using zinc oxide (ZnO)-ethanol nanofluid, with the aim of developing an environmentally friendly and energy-efficient heat transfer system. Experiments were conducted using both base fluid (ethanol) and ZnO-ethanol nanofluid under identical conditions to assess the effects of filling ratio, inclination angle, and nanoparticle concentration. The experimental setup involved the fabrication of a PHP with three loops (6.5 mm internal diameter, 1.5 mm wall thickness), subjected to thermal tests at 30% filling ratio. Nano fluid preparation included magnetic stirring and ultrasonic homogenization of ZnO nanoparticles in ethanol at 1 wt% concentration. Results reveal a 16% enhancement in effective thermal conductivity with the ZnO-ethanol nanofluid compared to ethanol alone. Optimum performance was observed at a 50% filling ratio and 30° inclination angle. Additionally, the ZnO nanofluid showed higher heat rejection and stability of 42 days. The study highlights the superior thermal efficiency and sustainability potential of ZnO-ethanol nanofluids in passive thermal management.
Full Text
Reference
Sangwai, J. S. and Byun, H. -S., A comprehensive review on the recent advances in applications of nanofluids for effective utilization of renewable energy, Renewable Sustainable Energy Rev., 207, 114901 (2025).
https://doi.org/10.1016/j.rser.2024.114901
Chaudhari, S. S., Pundkar, H. A., Giri, J., Sathish, T., Daryapurkar, S. A., Chadge, R. and Parthiban, A., Optimizing air conditioning efficiency: Utilizing nano-oxides ZnO, CuO, and TiO₂ with traditional and alternative refrigerants in medium temperature range cooling systems, Interact., 245(1), 108 (2024).
https://doi.org/10.1007/s10751-024-01931-z
Chavhan, M. and Singh, P. K., Enhancing heat pipe performance through hybrid wick structures: Balancing pore size and permeability, Appl. Therm. Eng., 256, 124079 (2024).
https://doi.org/10.1016/j.applthermaleng.2024.124079
Chen, Y., Chen, G., Xu, H. and Zhou, J., Numerical investigation of effect of fill ratio and inclination angle on a U-shaped elliptical gravity heat pipe thermal performance, Therm. Sci., 23-23(2025).
https://doi.org/10.2298/TSCI241113023C
Cheng, P. S. and Wong, S. C., Detailed visualization experiments on the start-up process and stable operation of pulsating heat pipes: Effects of internal diameter, Int. J. Heat Fluid Flow, 106, 109325 (2024).
https://doi.org/10.1016/j.ijheatfluidflow.2024.109325
Bumataria, R. K. and Chavda, N. K., An Investigation on Thermal Performance of Cylindrical Heat Pipe Using Hybrid Nanofluid, (2021).
Jothivenkatachalam, K., Nithya, A. and Karthikeyan, S., A Study on the Photocatalytic and Antimicrobial Activities of Chitosan–ZnO Nanocomposites, J. En-viron. Nanotechnol., 12(4), 09-16(2023).
https://doi.org/10.13074/jent.2023.12.234478
Kumar, A., Dutt, N. and Awasthi, M. K., Heat Transfer Enhancement Techniques: Thermal Performance, Optimization and Applications, Hoboken, 1-464 (2024).
https://doi.org/10.1002/9781394270996
Kumar, M. S. and Abraham, S., Applications of pulsating heat pipe (PHP) as an efficient heat transfer device: a review of recent developments, Heat Mass Transf., 60(7), 1285–1311 (2024).
https://doi.org/10.1007/s00231-024-03491-y
Lee, J. S., Rhi, S. H. and Kim, S. K., Modeling and simulation of heat pipes, J. Mech. Sci. Technol., 38(5), 2591–2612 (2024).
https://doi.org/10.1007/s12206-024-0437-x
Mane, K.V. and Alekseik, Y., Comprehensive parametric and design review for reducing pulsating heat pipes dependence on space orientation, Arch. Thermodyn., 45(2), 165-182 (2024).
https://doi.org/10.24425/ather.2024.150863
Miao, S., Xia, G., Zhou, W. and Shang, H., Effect of wettability and surface roughness on flow and heat transfer characteristics in nanochannels, Phys. Fluids, 36(10), 103613 (2024).
https://doi.org/10.1063/5.0232006
Rahman, M. A., Hasnain, M. M. S., Pandey, S., Tapalova, A., Akylbekov, N. and Zairov, R., Review on nanofluids: preparation, properties, stability, and thermal performance augmentation in heat transfer applications, ACS Omega, 9(30), 32328–32349 (2024).
https://doi.org/10.1021/acsomega.4c03279
Rahman, M. A., Hasnain, M. M. S., Pandey, S., Tapalova, A., Akylbekov, N. and Zairov, R., Review on nanofluids: preparation, properties, stability, and thermal performance augmentation in heat transfer applications, ACS Omega, 9(30), 32328–32349 (2024).
https://doi.org/10.1021/acsomega.4c03279
Samylingam, L., Aslfattahi, N., Kok, K. C., Kadirgama, K., Sazali, N., Schmirler, M., Ramasamy, D., Harun, W. S. W., Samykano, M., Veerendra, A. S., Semin, Green engineering with nanofluids: elevating energy efficiency and sustainability, J. Adv. Res. Micro Nano Eng., 16(1), 19–34 (2024).
https://doi.org/10.37934/armne.16.1.1934
Smrity, A. M. A. and Yin, P., Design and performance evaluation of pulsating heat pipe using metallic nanoparticles based hybrid nanofluids, Int. J. Heat Mass Transf., 218, 124773 (2024).
