Developing Hybrid and Functional Materials with Sol-gel Chemistry – A Review
J. Environ. Nanotechnol., Volume 14, No 3 (September 2025) pp. 540-558
Abstract
The sol-gel technique is a strong and chemically adaptable synthesis route for producing sophisticated inorganic, organic-inorganic hybrid, and composite materials. The sol-gel process uses hydrolysis and polycondensation reactions of metal alkoxide or salt precursors to generate nanostructured materials with controlled porosity, shape, and surface functionality. This bottom-up technique enables the synthesis of a wide range of material shapes, including thin films, aerogels, xerogels, fibers, coatings, and monolithic structures, under relatively mild circumstances. The incorporation of templating techniques and hybridization schemes has increased the adaptability of sol-gel produced materials, improving their mechanical and functional qualities. Applications include a wide range of fields, such as optical and electronic devices, energy storage systems, environmental remediation (e.g., removal of heavy metals and BPA), gas separation membranes, and biomedical applications for drug delivery and tissue engineering. The sol-gel process's intrinsic capacity to tune structural, chemical, and mechanical properties at the molecular level makes it a key component in the design and creation of next-generation functional materials. Sol-gel-based materials' mild synthesis conditions and adjustable nanostructures help them overcome important constraints in the biomedical and energy storage domains. Sol-gel-derived oxides such as TiO₂ and RuO₂ provide high surface area, enhanced cyclic stability, and improved ion diffusion in batteries and supercapacitors, achieving capacitances exceeding 700 F/g and capacities up to 190 mAh/g. In biomedical applications, sol-gel bioactive glasses promote rapid bone regeneration due to their high porosity and reactivity, while sol-gel silica nanoparticles enable controlled drug delivery with high loading efficiency. Sol-gel synthesis, in contrast to conventional techniques, permits the incorporation of delicate biomolecules without causing thermal degradation. Sol-gel is a potent platform for next-generation functional materials because of its adaptability.
Full Text
Reference
Aurobind, S. V., Amirthalingam, K. P. and Gomathi, H., Sol-gel based surface modification of electrodes for electroanalysis, Adv. Colloid Interface Sci., 121(1–3), 1–7 (2006).
https://doi.org/10.1016/j.cis.2006.04.001
Arenillas, Ana, Menéndez, J. Angel, Reichenauer, Gudrun, Celzard, Alain, Fierro, Vanessa, Maldonado Hodar, Francisco José, Bailόn-Garcia, Esther, Job, Nathalie, Organic and Carbon Gels: From Laboratory Synthesis to Applications, Springer, 87-12, 2019.
https://doi.org/10.1007/978-3-030-13897-4_3
Baino, F., Fiume, E., Miola, M., Leone, F., Onida, B. and Verné, E., Fe-doped bioactive glass-derived scaffolds produced by sol-gel foaming, Mater. Lett., 235, 207-211 (2019).
https://doi.org/10.1016/j.matlet.2018.10.042
Brinker, C. J., Frye, G. C., Hurd, A. J. and Ashley, C. S., Fundamentals of sol-gel dip coating, Thin Solid Films, 201(1), 97–108 (1991).
https://doi.org/10.1016/0040-6090(91)90158-T
Chávez, V. A. and Boccaccini, A. R., Innovations in electrophoretic deposition: Alternating current and pulsed direct current methods, Electrochim. Acta, 65, 70–89, 2012,
https://doi.org/10.1016/j.electacta.2012.01.015
Chen, D., Anti-reflection (AR) coatings made by sol–gel processes: A review, Sol. Energy Mater. Sol. Cells, 68(3–4), 313–336 (2001).
https://doi.org/10.1016/S0927-0248(00)00365-2
Corni, I., Ryan, M. P. and Boccaccini, A. R., Electrophoretic deposition: From traditional ceramics to nanotechnology, J. Eur. Ceram. Soc., 28(7), 1353–1367, (2008).
https://doi.org/10.1016/j.jeurceramsoc.2007.12.011
De, C. B. M., Calefi, P. S., Ciuffi, K. J., Faria, D. E. H., Rocha, L. A., Nassar, E. J., Silva, J. V. L., Oliveira, M. F. and Maia, I. A., Coating of polyamide 12 by sol-gel methodology, J. Therm. Anal. Calorim., 115(2), 1029–1035 (2014).
https://doi.org/10.1007/s10973-013-3384-9
Djuriić, A. B., Ng, A. M. C. and Chen, Y. X., ZnO nanostructures for optoelectronics: Material properties and device applications, Prog. Quantum Electron., 34(4), 191–259 (2010).
https://doi.org/10.1016/j.pquantelec.2010.04.001
Ebrahimifard, R., Golobostanfard, M. R. and Abdizadeh, H., Sol–gel derived Al and Ga co-doped ZnO thin films: An optoelectronic study, Appl. Surf. Sci., 290, 252–259 (2014).
https://doi.org/10.1016/j.apsusc.2013.11.062
Hawthorne, H. M., Neville, A., Troczynski, T., Hu, X., Thammachart, M., Xie, Y., Fu, J. and Yang, Q., Characterization of chemically bonded composite sol–gel based alumina coatings on steel substrates, Surf. Coat. Technol., 176(2), 243–252 (2004).
https://doi.org/10.1016/S0257-8972(03)00663-7
Ibrahim, N. B., Shomar, A. S. M. and Ahmad, S. H., Effect of aging time on the optical, structural and photoluminescence properties of nanocrystalline ZnO films prepared by a sol–gel method, Appl. Surf. Sci., 283, 599–602, (2013).
https://doi.org/10.1016/j.apsusc.2013.06.155
Ismail, W. N. W., Sol–gel technology for innovative fabric finishing—A Review, J. Sol-Gel Sci. Technol., 78, 698-707 (2016).
https://doi.org/10.1007/s10971-016-4027-y
Ismail, W. N. W., Sol–gel technology for innovative fabric finishing—A Review, J. Sol-Gel Sci. Technol., 78, 698-707 (2016).
https://doi.org/10.1007/s10971-016-4027-y
Jelle, B. P., Baetens, R. and Gustavsen, A., Aerogel insulation for building applications, Energy Build., 43(4), 761-769(2015).
https://doi.org/10.1016/j.enbuild.2010.12.012
Jittiarporn, P., Badilescu, S., Sawafta, A. M. N., Sikong, L. and Truong, V. V., Electrochromic properties of sol–gel prepared hybrid transition metal oxides – A short review, J. Sci.: Adv. Mater. Devices, 2(3), 286–300, (2017).
https://doi.org/10.1016/j.jsamd.2017.08.005
Kalogiouri, P. N., Tsalbouris, A., Kabir, A., Furton, G. K. and Samanidou, F. V., Synthesis and application of molecularly imprinted polymers using sol–gel matrix imprinting technology for the efficient solid-phase extraction of BPA from water, Microchem. J., 157, 104965 (2020).
https://doi.org/10.1016/j.microc.2020.104965
Kawamura, G., Ohara, K., Tan, K. W., Goto, T., Nakamura, Y., Inoue, M., Muto, H., Yamaguchi, K., Boccaccini, R. A. and Matsuda, A., Multiferroic nanocomposite fabrication via liquid phase using anodic alumina template, Sci. Technol. Adv. Mater., 19(1), 535-542 (2018).
https://doi.org/10.1080/14686996.2018.1493888
Kawamura, G., Sato, S., Muto, H., Sakai, M., Lim, P. B., Watanabe, K., Inoue, M. and Matsuda, A., AgBr nanocrystal-dispersed silsesquioxane–titania hybrid films for holographic materials, Mater. Lett., 64(23), 2648–2651 (2010).
https://doi.org/10.1016/j.matlet.2010.08.068
Kawamura, G., Tsurumi, Y., Muto, H., Sakai, M., Inoue, M. and Matsuda, A., Reversible conversion between AgCl and Ag in AgCl-doped RSiO3/2–TiO2 films prepared by a sol–gel technique, Mater. Chem. Phys., 130(1–2), 264–269 (2011).
https://doi.org/10.1016/j.matchemphys.2011.06.036
Kotani, Y., Matsuda, A., Tatsumisago, M., Minami, T., Umezawa, T. and Kogure, T., Formation of anatase nanocrystals in sol-gel derived TiO2-SiO2 thin films with hot water treatment, J. Sol-Gel Sci. Technol., 19, 585-588 (2000).
https://doi.org/10.1023/A:1008709210723
Kumar, A., Yadav, N., Bhatt, M., Mishra, K. N., Chaudhary, P. and Singh, R., Sol-gel derived nanomaterials and it’s applications: a review, Res. J. Chem. Sci., 5(12), 1-6 (2015).
Lee, K. J., Choe, Y. J., Kim, Y. H., Lee, J. K. and Hwang, H. J., Fabrication of silica aerogel composite blankets from an aqueous silica aerogel slurry, Ceram. Int., 44(2), 2204–2208 (2018).
https://doi.org/10.1016/j.ceramint.2017.10.176
Li, L., Liu, X., Wang, G., Liu, Y., Kang, W., Deng, N., Zhuang, X. and Zhou, X., Research progress of ultrafine alumina fiber prepared by sol-gel method: A review, Chem. Eng. J., 421, 127744 (2021).
https://doi.org/10.1016/j.cej.2020.127744
Matsuda, A., Higashi, Y., Tadanaga, K. and Tatsumisago, M., Hot-water treatment of sol-gel derived SiO2-TiO2 microparticles and application to electrophoretic deposition for thick films, J. Mater. Sci., 41, 8101-8108 (2006).
https://doi.org/10.1007/s10853-006-0419-7
Matsuda, A., Kotani, Y., Kogure, T., Tatsumisago, M. and Minami, T., Transparent anatase nanocomposite films by the sol-gel process at low temperatures, J. Am. Ceram. Soc., 83(1), 229-231 (2000).
https://doi.org/10.1111/j.1151-2916.2000.tb01178.x
Matsuda, A., Matoda, T., Kogure, T., Tadanaga, T., Minami, T. and Tatsumisago, M., Formation and characterization of titania nanosheet-precipitated coatings via sol-gel process with hot water treatment under vibration, Chem. Mater., 17(4), 749-757 (2005).
https://doi.org/10.1021/cm048135h
Matsuda, A., Matoda, T., Tadanaga, K., Minami, T., Tatsumisago, M. and Kogure, T., Lowering of preparation temperatures of anatase nanocrystals-dispersed coatings via sol-gel process with hot water treatment, J. Am. Ceram. Soc., 88(6), 1421-1426 (2005).
https://doi.org/10.1111/j.1551-2916.2005.00313.x
Periyasamy, A. P., Venkataraman, M., Kremenakova, D., Militky, J. and Zhou, Y., Progress in sol-gel technology for the coatings of fabrics, Mater., 13(8), 1838 (2020).
https://doi.org/10.3390/ma13081838
Pirzada, T., Arvidson, S. A., Saquing, C. D., Shah, S. S. and Khan, S. A., Hybrid silica-PVA nanofibers via sol-gel electrospinning, Langmuir, 28(13), 5834–5844 (2012).
https://doi.org/10.1021/la300049j
Qin, H., Guo, W., Huang, X., Gao, P. and Xiao, H., Preparation of yttria-stabilized ZrO2 nanofiltration membrane by reverse micelles-mediated sol-gel process and its application in pesticide wastewater treatment, J. Eur. Ceram. Soc., 40(1), 145–154 (2020).
https://doi.org/10.1016/j.jeurceramsoc.2019.09.023
Sakka, S., The outline of applications of the sol-gel method, Handb. Sol-Gel Sci. Technol., 1905-1937 (2018).
https://doi.org/10.1007/978-3-319-32101-1_53
Salvaggio, M. G., Passalacqua, R., Abate, S., Perathoner, S., Centi, G., Lanza, M. and Stassi, A., Functional nano-textured titania-coatings with self-cleaning and antireflective properties for photovoltaic surfaces, Sol. Energy, 125, 227–242 (2016a).
https://doi.org/10.1016/j.solener.2015.12.012
Tadanaga, K., Fujii, T., Matsuda, A., Minami, T. and Tatsumisago, M., Micropatterning of sol-gel derived thin films using hydrophobic-hydrophilic patterned surface, J. Sol-Gel Sci. Technol., 31(1-3), 299-302 (2004).
https://doi.org/10.1023/B:JSST.0000048007.43110.fa
Tadanaga, K., Surface morphology control of thin films prepared by solution processes and its application, J. Ceram. Soc. Jpn., 121(1417), 819-824 (2013).
https://doi.org/10.2109/jcersj2.121.819
Tadanaga, K., Yamaguchi, N., Uraoka, Y., Matsuda, A., Minami, T. and Tatsumisago, M., Anti-reflective properties of nanostructured alumina thin films on poly(methyl methacrylate) substrates by the sol–gel process with hot water treatment, Thin Solid Films, 516(14), 4526–4529 (2008).
https://doi.org/10.1016/j.tsf.2007.05.089
Takahashi, K., Tadanaga, K., Matsuda, A., Hayashi, A. and Tatsumisago, M., Formation of convex shaped poly(phenylsilsesquioxane) micropatterns on indium tin oxide substrates with hydrophobic-hydrophilic patterns using the electrophoretic sol-gel deposition method, J. Mater. Res., 21(5), 1255-1260 (2006).
https://doi.org/10.1557/jmr.2006.0150
Takahashi, K., Tadanaga, K., Matsuda, A., Hayashi, A. and Tatsumisago, M., Fabrication of convex-shaped polybenzylsilsesquioxane micropatterns by the electrophoretic sol-gel deposition process using indium tin oxide substrates with a hydrophobic-hydrophilic-patterned surface, J. Sol-Gel Sci. Technol., 43(1), 85-91 (2007).
https://doi.org/10.1007/s10971-006-1526-2
Takahashi, K., Tadanaga, K., Tatsumisago, M. and Matsuda, A., Characterization and electrophoretic deposition of poly(phenylsilsesquioxane)-titania hybrid particles prepared by the sol-gel method, J. Am. Ceram. Soc., 89(10), 3107-3111 (2006).
https://doi.org/10.1111/j.1551-2916.2006.01228.x
Tan, W. K., Razak, A. K., Lockman, Z., Kawamura, G., Muto, H. and Matsuda, A., Synthesis of ZnO nanorod–nanosheet composite via facile hydrothermal method and their photocatalytic activities under visible-light irradiation, J. Solid State Chem., 211, 146–153 (2014).
https://doi.org/10.1016/j.jssc.2013.12.026
Tawa, S., Sato, Y., Orikasa, Y., Matsumoto, K. and Hagiwara, R., Lithium fluoride/iron difluoride composite prepared by a fluorolytic sol–gel method: Its electrochemical behavior and charge–discharge mechanism as a cathode material for lithium secondary batteries, J. Power Sources, 412, 180–188 (2019).
https://doi.org/10.1016/j.jpowsour.2018.11.046
Tohge, N., Shinmou, K. and Minami, T., Effects of UV-irradiation on the formation of oxide thin films from chemically modified metal-alkoxides - Code: EP22, J. Sol-Gel. Sci. Technol., 2, 581-585 (1994),
https://doi.org/10.1007/BF00486313
Toonder, J. D., Malzbender, J., With, G. D. and Balkenende, R., Fracture toughness and adhesion energy of sol–gel coatings on glass, J. Mater. Res., 17, 224–233 (2002).
https://doi.org/10.1557/JMR.2002.0032
Tsvetkov, N., Larina, L., Kang, J. K. and Shevaleevskiy, O., Sol-gel processed tio2 nanotube photoelectrodes for dye-sensitized solar cells with enhanced photovoltaic performance, Nanomater., 10(2), 296 (2020).
https://doi.org/10.3390/nano10020296
Wai, K. T., Hiroyuki, M., Go, K., Zainovia, L. and Atsunori, M., Nanomaterial Fabrication through the Modification of Sol–Gel Derived Coatings, Nanomater., 11, 1-30 (2021).
https://doi.org/10.3390/nano11010181
Wu, G., Yang, Y., Lei, Y., Fu, D., Li, Y., Zhan, Y. and Teng, M., Hydrophilic nano-SiO2/PVA-based coating with durable antifogging properties, J. Coat. Technol. Res., 17(5), 1145–1155 (2020).
https://doi.org/10.1007/s11998-020-00338-z
Wu, J. W., Huang, Y. Q., Li, H. B., Runt, J. and Yeh, J. T., Properties of polyamide 6,10/poly(vinyl alcohol) blends and impact on oxygen barrier performance, Polym. Int., 67(4), 453–462 (2017).
https://doi.org/10.1002/pi.5528
Xu, J., Jiang, S. X., Peng, L., Wang, Y., Shang, S., Miao, D. and Guo, R., AgNps-PVA–coated woven cotton fabric: Preparation, water repellency, shielding properties and antibacterial activity, J. Ind. Text., 48(10), 1545–1565 (2018).
https://doi.org/10.1177/1528083718764908
Yamaguchi, N., Nakamura, T., Tadanaga, K., Matsuda, A., Minami, T. and Tatsumisago, M., Direct formation of Zn-Al layered double hydroxide films with high transparency on glass substrate by the sol-gel process with hot water treatment, Cryst. Growth Des., 6(7), 1726-1729 (2006).
https://doi.org/10.1021/cg060220+
Yamaguchi, N., Tadanaga, K., Matsuda, A., Minami, T. and Tatsumisago, M., Antireflective properties of flowerlike alumina thin films on soda–lime silica glass substrates prepared by the sol–gel method with hot water treatment, Thin Solid Films, 515(7–8), 3914–3917 (2007).
https://doi.org/10.1016/j.tsf.2006.11.009
Ying, L., Gaoyang, Z., Weihua, Z. and Yuanqing, C., Fine pattern fabrication on SnO2: Sb thin films formed by the sol-gel process, Surf. Interface Anal., 38(9), 1291-1295 (2006).
