Investigation on the Mechanical and Morphological behavior of Vetiver Fiber-reinforced Epoxy Composites with Nano-alumina Particles
J. Environ. Nanotechnol., Volume 14, No 2 (June 2025) pp. 341-351
Abstract
Light materials including fiber-reinforced polymer matrix are ideally suited to meet the contemporary demands for low-density materials with good mechanical strength. This initiative resulted in multiple studies aimed at integrating lignocellulosic natural fibers into polymer matrix. This work proposed the utilization of vetiver fibers (VF) (Chrysopogon zizanioides) as the reinforcement in epoxy composite integrated with nano alumina (nAl2O3) particles. Their mechanical properties were characterized by tensile, compression, flexural, and impact tests. Morphological investigations of VF-reinforced composite were performed to study fracture surfaces post-testing. Findings revealed a notable disparity upon the integration of nAl2O3 into the epoxy matrix. The impact tests showed superior performance in specimen with nanocomposite compared to the control group, with a mean value of 118 ± 2.9 J. Most mechanical properties in composites showed statistically significant improvements as confirmed by Tukey’s test. SEM micrographs showed a significant reduction in agglomerations of nAl2O3 reinforcement and interface delamination, suggesting enhanced interface strength.
Full Text
Reference
Amjad, A., Abidin, M. S. Z., Alshahrani, H. and A Rahman, A. A., Effect of fibre surface treatment and nanofiller addition on the mechanical properties of flax/pla fibre reinforced epoxy hybrid nanocomposite, Polym., 13(21), 3842(2021).
https://doi.org/10.3390/polym13213842
Aynalem, G. F. and Sirahbizu, B., Effect of Al₂O₃ on the tensile and impact strength of flax/unsaturated polyester composite with emphasis on automobile body applications, Adv. Mater. Sci. Eng., 2021(1), 6641029(2021).
http://dx.doi.org/10.1155/2021/6641029
Balasubramanian, R., Khare, N., Mann, V. S., D, G. A. G. M., Masih, S. A., Nagarajan, N., Suresh, K. N. and Rao, P. G., Synthesis of Porous Biocarbon from Artocarpus hirsutus Husks and Its Microwave Shielding Effect on Agave Fiber-Reinforced Vinyl Ester Composite at High-Frequency Bands, Fibers. Polym., 26(3), 1281–1296(2025).
https://doi.org/10.1007/s12221-024-00832-w
Ben, S. J., Julyes, J. S., Sivakumar, K., Mayakannan, A. V. and Arunprakash, V. R., Visco-Elastic, Thermal, Antimicrobial and Dielectric Behaviour of Areca Fibre-Reinforced Nano-silica and Neem Oil-Toughened Epoxy Resin Bio Composite, Silicon., 13(6), 1703–1712(2021).
https://doi.org/10.1007/s12633-020-00569-0
Bothiraj, T., Boopathi, K., Kalaiselvan, K., Benham, A. and Mayakannan, S., Experimental investigations on mechanical and wear behavior of waste marble dust and coconut fiber reinforced hybrid bio composites, Mater. Today. Proc., 68(6), 2239–2242(2022).
https://doi.org/10.1016/j.matpr.2022.08.441
Dos, S. A. J. G., Ribeiro, M. M., Corrêa, A. D. C., Rodrigues, J. D. S., Silva, D. S., Junio, R. F. P. and Monteiro, S. N., Morphological, chemical and mechanical properties of hybrid polyester composites reinforced with bamboo fibers and kaolin waste, J. Mater. Res. Technol., 30, 1–15(2024).
https://doi.org/10.1016/j.jmrt.2024.03.003
Firoz, K. M., Alamgir, H. M., Abubakar, S. M. and Mosharraf, H. M., Investigate the effects of different control factors on mechanical characteristics of natural fiber reinforced composite, Next. Mater., 8, 100608(2025).
https://doi.org/10.1016/j.nxmate.2025.100608
Girimurugan, R., Sahoo, G., Sivalingam, A. and Mayakannan, S., Effect of nano alumina powder and water hyacinth stem powder addition on tensile properties of polypropylene matrix hybrid composites – An experimental study, Mater. Today. Proc., 60(2), 2099–2104(2022a).
http://dx.doi.org/10.1016/j.matpr.2022.01.477
Girimurugan, R., Shilaja, C., Mayakannan, S., Rajesh, S. and Aravinth, B., Experimental investigations on flexural and compressive properties of epoxy resin matrix sugarcane fiber and tamarind seed powder reinforced bio-composites, Mater. Today. Proc., 66, 822–828(2022b).
http://dx.doi.org/10.1016/j.matpr.2022.04.386
Harak, S. S., Krishnaveni, K., Karthick, K., Chinnarasu, K., Venkata, H. P. P., Tonk, A. and Mayakannan, S., Experimental Study on the Mechanical Properties of Hybrid Areca and Abaca Fiber Reinforced Polymer Composites, J. Environ. Nanotechnol., 13(4), 92–101(2024).
https://doi.org/10.13074/jent.2024.12.244977
Janyakunmongkol, K., Nhuapeng, W. and Thamjaree, W., Effect of alkaline treatment on mechanical properties of composites between vetiver fibers and epoxy resin, J. Mech. Behav. Mater., 33(1), 20220310(2024).
https://doi.org/10.1515/jmbm-2022-0310
Jena, P. K., Mohanty, J. R. and Nayak, S., Effect of Surface Modification of Vetiver Fibers on Their Physical and Thermal Properties, J. Nat. Fibers., 19(1), 25–36(2022).
https://doi.org/10.1080/15440478.2020.1726249
Jena, P. K., Mohanty, J. R., Nayak, S., Khuntia, S. K., Panda, K. R. and Sahu, R., Comprehensive investigation of mechanical and thermal properties of vetiver grass and red mud reinforced hybrid composites, J. Nat. Fibers., 19(13), 5152–5162(2022).
https://doi.org/10.3390/bdcc7010025
Jha, K., Tamrakar, P., Kumar, R., Sharma, S., Singh, J., Ilyas, R. A., Rangappa, S. M. and Siengchin, S., Effect of hybridization on physio-mechanical behavior of Vetiver and Jute fibers reinforced epoxy composites for structural applications: Studies on fabrication, physicomechanical, water-absorption, and morphological properties, J. Ind. Text., 51(2), 2642-2664(2022).
https://doi.org/10.1177/15280837221098573
Krishnasamy, S., Irulappasamy, S., Thiagamani, S. M. K., Ilyas, R. A. and Khoo, P. S., Examining the mechanical properties of hybrid curauá-basalt reinforced polyester composites, Polym. Compos., 29694(2025).
https://doi.org/10.1002/pc.29694
Kumar, K. P., Lokeshwar, G., Reddy, C. U. K., Shetty, N., Shahabaz, S. M. and Nargis, T., Experimental investigation of mechanical properties and morphology of ramie, bamboo, and ramie-bamboo hybrid composites with silicon carbide and alumina nano-fillers, Mater. Res. Express., 12(2), 025306 (2025).
Manalu, J., Numberi, J. J., Safanpo, A., Fitriyana, D. F., Wijaya, T. L., Siregar, J. P., Cionita, T. and Jaafar, J., Characterization of eco-friendly composites for automotive applications prepared by the compression molding method, Polym. Compos., 45(9), 8104–8118(2024).
https://doi.org/10.1002/pc.28327
Nautiyal, S., Dimri, S., Riyal, I., Sharma, H. and Dwivedi, C., Natural fibres and their composites: a review of chemical composition, properties, retting methods, and industrial applications, Cellul., 32(6), 3497–3527(2025).
https://doi.org/10.1007/s10570-025-06487-x
Reddy, P. V, Reddy, R. M., Rao, P. S., Krishnudu, D. M., Reddy, R. V. S. and Kumar, A. E., Parameters Selection for Enhanced Mechanical and Wear Properties of Natural Fiber Reinforced Hybrid Composites Using PSI Technique, J. Nat. Fibers., 19(15), 10111–10125(2022).
http://dx.doi.org/10.1016/j.matpr.2021.12.043
Rout, I., Singh, M., Mahapatra, T. R., Mishra, P., Dash, S. and Mishra, D., Characterization and Optimization of Dry Sliding Wear Properties of Partially Biodegradable Hybrid Polymer Composites, J. Bio. Tribo. Corros., 11(2), 59(2025).
https://doi.org/10.1007/s40735-025-00979-w
Sathiyamurthy, S., Saravanakumar, S., Ananthi, N. and Devi, P., Optimization of fiber length and filler content for improving the mechanical behaviour of musa acuminate fiber-reinforced epoxy composite using response surface methodology, J. Ceram. Proc. Res., 24(4), 683–692(2023).
https://doi.org/10.36410/jcpr.2023.24.4.683
Senguptaa, S., Effect of different lignocellulosic fibre-based needle punched nonwovens on mechanical properties of bio-reinforced composite, Indian. J. Fibre. Text. Res., 45(4), 436–443(2020).
https://doi.org/10.56042/ijftr.v45i4.31096
Senthilkumar, N., Deepanraj, B., Dhinakarraj, C. K. and Yuvaperiyasamy, M., Characterization Studies on Vetiveria Zizanioides Natural Fiber and Graphene Filler Reinforced Nano Polymer Composite Material, J. Environ. Nanotechnol., 13(2), 214–219(2024).
https://doi.org/10.13074/jent.2024.06.242561
Sivanantham, G., Ayyappan, V., Loganathan, P., Mani, S. K., Vijaya, G. S., Raghunathan, V., Rangappa, S. M. and Siengchin, S., Sustainable hybrid composites from flax, vetiver, and Luffa cylindrica: Acoustic and structural performance, Polym. Compos., 1-17(2025).
https://doi.org/10.1002/pc.29900
Tavadi, A., Basheer, D., Melese, K. G., Kumaresan, K., Mohan, N., Kerur, M. R. H. and Shashidhara, L. C., Experimental analysis of mechanical properties and FTIR analysis of areca fiber-reinforced epoxy composites incorporating Al₂O₃, J. Ind. Text., 55, 15280837241313217(2025).
https://doi.org/10.1177/15280837241313217
Thangaraj, S., Pradeep, G. M., Heaven Dani, M. S., Mayakannan, S. and Benham, A., Experimental investigations on tensile and compressive properties of nano alumina and arecanut shell powder reinforced polypropylene hybrid composites, Mater. Today. Proc., 68, 2243–2248(2022).
https://doi.org/10.1007/s10751-024-02121-7
Tyagi, A., Gupta, B. L., Mukhija, L., Bhandari, M., Meena, A. and Meena, S. L., Mechanical and tribological behavior of NFRC’s: A comprehensive analysis of properties & applications, Green. Mater., 1-12(2024).
https://doi.org/10.1680/jgrma.24.00113
Venkatesh, R., Angalaparameswari, C., Ammaiappan, M., Das, A. D., Arunkumar, G., Kamatchi, R. M. and Kaliyaperumal, G., Effective Utilization of Bast Fiber in High Density Polyethylene Nanocomposite Enriched by Alumina Nanoparticle: Mechanical Performance Evaluation, J. Inst. Eng. India. Ser. D., (2024)
