Mechanical and Microstructural Enhancement of Eco-friendly Cement Composites Using Treated Coir Fiber, Bagasse Pulp and Silicon Dioxide Nanoparticles
J. Environ. Nanotechnol., Volume 14, No 2 (June 2025) pp. 112-123
Abstract
The research aims to improve and detail the characteristics of cement composite boards reinforced with recycled coir fiber, bagasse pulp, and nano-SiO2 for use in building projects in developing countries. Though it is easily accessible in many places, coir fiber (Cocos nucifera) has issues bonding strongly to the cement matrix. In order to modify the fiber characteristics prior to reinforcing, a mild treatment was implemented, which used varying alkali concentrations. Alkali (NaOH) treatment considerably enhanced the tensile strength of fibers, Young's modulus, thermal stability, thermogravimetric analysis and the single fiber tensile test. The laboratory-simulated Hatschek technique was employed to fabricate cement composite boards that contained varying proportions of treated and untreated coir fiber (5–15 wt %). The three-point bending tests were used to analyze the mechanical behaviour of the boards. Results demonstrated that treated fiber-reinforced composites had much higher flexural strength and ductility than untreated fiber-reinforced composites. Reinforced with treated fibers, the composites proved to be exceptionally strong, surpassing the minimum criteria of standards for fiber cement boards. The composite boards that contained 19 wt%, 1 wt %, and 5 wt % of bagasse pulp, nano-SiO2, and treated coir fibers, respectively, achieved an optimal flexural strength of 10.66 MPa. This investigation demonstrates that the mechanical performance and behavior of cement fiber composite boards can be improved by the effective augmentation and repurposing of recycled coir fibers as reinforcement.
Full Text
Reference
Abou, Y. H. and Kamel, S., Physico-mechanical properties of all-cellulose composites prepared by different approaches from micro-fibrillated bagasse pulp fibers, Mater. Today. Commun., 35, 105672(2023).
https://doi.org/10.1016/j.mtcomm.2023.105672
Akbulut, Z. F. and Guler, S., Enhancing the resilience of cement mortar, Investigating Nano-SiO2 size and hybrid fiber effects on sulfuric acid resistance, J. Build. Eng., 98, 111187(2024).
https://doi.org/10.1016/j.jobe.2024.111187
Ali, B., Farooq, M. A., El-Ouni, M. H., Azab, M. and Elhag, A. B., The combined effect of coir and superplasticizer on the fresh, mechanical, and long-term durability properties of recycled aggregate concrete, J. Build. Eng., 59, 105009(2022).
https://doi.org/10.1016/j.jobe.2022.105009
Amsalu, F, T., Chande, J. Y. A., Kivevele, T. and Rahbar, N., A review on degradation improvement of sisal fiber by alkali and pozzolana for cement composite materials, J. Nat. Fibers., 21(1), 2335327(2024).
https://doi.org/10.1080/15440478.2024.2335327
Bheel, N., Kumar, S., Kirgiz, M. S., Ali, M., Almujibah, H. R., Ahmad, M. and Gonzalez, R. A., Effect of wheat straw ash as cementitious material on the mechanical characteristics and embodied carbon of concrete reinforced with coir fiber, Heliyon., 10(2), e24313(2024).
https://doi.org/10.1016/j.heliyon.2024.e24313
Bothiraj, T., Boopathi, K., Kalaiselvan, K., Benham, A. and Mayakannan, S., Experimental investigations on mechanical and wear behavior of waste marble dust and coconut fiber reinforced hybrid bio composites, Mater. Today. Proc., 68, 2239–2242(2022).
https://doi.org/10.1016/j.matpr.2022.08.441
Brasil, C. D. S. W., Barroso, S. H. D. A., De, P. S. L. G., Cabral, A. E. B. and Stefanutti, R., Potential application of by-products from the construction industry and waste from coconuts for concrete road paving blocks, physical and mechanical properties, Int. J. Pavement. Eng., 25(1), 2424392(2024).
https://doi.org/10.1080/10298436.2024.2424392
Dutta, T., Pandey, S. and Sengupta, H., In-depth exploration of utilizing water hyacinth fibers as a sustainable method for reinforcing concrete, Sustainable Materials, Structures and IoT, 1st Ed., 1-326(2024).
https://doi.org/10.1201/9781003596776-7
Ehman, N. V., Nagy, D., Felissia, F. E., Vallejos, M. E., Quispe, I., Area, M. C. and Chinga, C. G., Biocomposites of Bio-Polyethylene Reinforced with a Hydrothermal-Alkaline Sugarcane Bagasse Pulp and Coupled with a Bio-Based Compatibilizer, Mol., 25(9), 2158(2020).
https://doi.org/10.3390/molecules25092158
Gavilanes, A., Noorvand, H., Hassan, M., Arce, G. and Rupnow, T., Incorporation of Cellulose Nanocrystals Synthesized from Rice Husk in Engineered Cementitious Composites, Transp. Res. Rec. J., 2679(1), 1996-2014(2024).
https://doi.org/10.1177/03611981241258749
Ghosh, S., Bansal, S., Choudhary, L. and Sahu, V., Effects of coconut fiber on mechanical properties of pervious concrete incorporating recycled concrete aggregates, SSRN. Electron. J., 1-10(2024)
https://doi.org/10.2139/ssrn.4865283
Hama, S. M., Hamadi, E. F. and Jahami, A., structural behavior of reinforced fibrous concrete beams incorporating nano silicon dioxide powder, Eng. Rep., 7(1), e13078(2025).
https://doi.org/10.1002/eng2.13078
Kameli, S., Shahi, A. H. and Mahboob, A., Investigating the mechanical properties of natural fiber-reinforced concrete with kenaf, jute and coconut fibers, J. Civ. Eng. Res., 6(4), 32–39(2024).
https://doi.org/10.61186/JCER.6.4.32
Lamichhane, N., Lamichhane, A. and Gyawali, T. R., Enhancing mechanical properties of mortar with short and thin banana fibers, A sustainable alternative to synthetic fibers, Heliyon., 10(10), e30652(2024).
https://doi.org/10.1016/j.heliyon.2024.e30652
Li, L., Jin, P., Zhang, K., Yan, C., Zhang, N., Li, Y. and Feng, Q., Influence of freeze–thaw cycles on fracture behaviors of Nano-SiO2 modified high-strength high- ductility alkali-activated material, Theor. Appl. Fract. Mech., 135, 104774(2025).
https://doi.org/10.1016/j.tafmec.2024.104774
Mahboob, A., Hassanshahi, O., Safi, M. and Majid, T. A., Experimental investigation of eco-friendly fiber-reinforced concrete using recycled and natural fibers, integrated with recycled aggregates, Adv. Compos. Mater., 33(6), 1101–1130(2024).
https://doi.org/10.1080/09243046.2024.2322799
Mahmood, A., Pechociakova, M., Noman, M. T., Wacławek, S., Gheibi, M., Behzadian, K., Wiener, J. and Militky, J., Aging behaviour assessment of cellulosic fibres in alkaline media, A green technology approach in construction materials, J. Build. Eng., 92, 109685(2024).
https://doi.org/10.1016/j.jobe.2024.109685
Mahmoud, A. E. W., Integrating fiber with new cement trends to create a greener future for sustainable concrete, Glob. J. Eng. Technol. Adv., 21(2), 001–006(2024).
https://doi.org/10.30574/gjeta.2024.21.2.0203
Maier, D., Manea, D. L., Tămas, G. D. R., Tiriac, A. and Costin, P., Wood–cement composites, A sustainable approach for mitigating environmental impact in construction, J. Compos. Sci., 8(11), 474(2024).
https://doi.org/10.3390/jcs8110474
Majumder, A., Stochino, F., Frattolillo, A., Valdes, M., Gatto, G. and Martinelli, E., Sustainable retrofitting solutions, evaluating the performance of jute fiber nets and composite mortar in natural fiber textile reinforced mortars, Sustainability., 16(3), 1175(2024).
https://doi.org/10.3390/su16031175
Mkilima, T., Sabitov, Y., Shakhmov, Z., Abilmazhenov, T., Tlegenov, A., Jumabayev, A., Turashev, A. and Kaliyeva, Z., Exploring the synergistic effect of recycled glass fibres and agricultural waste ash on concrete strength and environmental sustainability, Clean. Eng. Technol., 20, 100752(2024).
https://doi.org/10.1016/j.clet.2024.100752
Morsi, S. M. M., Abd, El. S. E. S., Ismail, A. and Kamel, S., Styrene/acrylate copolymer emulsions as strengthening agents for kraft bagasse pulp, A way for enhancing the mechanical properties of paper, J. Appl. Polym. Sci., 141(17), e55290(2024).
https://doi.org/10.1002/app.55290
Palanisamy, S., Murugesan, T. M., Palaniappan, M., Santulli, C. and Ayrilmis, N., Fostering sustainability, The environmental advantages of natural fiber composite materials, a mini review, Environ. Res. Technol., 7(2), 256–269(2024).
https://doi.org/10.35208/ert.1397380
Ramya, V. and Vijayaprabha, C., Investigation on mechanical behavior of engineered cementitious composites incorporating alkali‐resistant glass fiber and quarry dust, Struct. Concr., 25(5), 3866–3882(2024).
https://doi.org/10.1002/suco.202301140
Siouta, L., Apostolopoulou, M. and Bakolas, A., Natural Fibers in Composite Materials for Sustainable Building, A state of the art review on treated hemp fibers and hurds in mortars, Sustainability, 16(23), 10368(2024).
https://doi.org/10.3390/su162310368
Sridhar, R., Aosai, P., Imjai, T., Setkit, M., Shirkol, A. and Laory, I., Influence of Nanoparticles and PVA Fibers on Concrete and Mortar on Microstructural and Durability Properties, Fibers, 12(7), 54(2024).
https://doi.org/10.3390/fib12070054
Sun, D., Fan, X., Xie, Y., Ren, X., Ding, F., Wu, R. and Ji, H., Experimental study and multi-objective optimization of the shear mechanical properties of recycled aggregate concrete with hybrid fibers and nano SiO2, Constr. Build. Mater., 429, 136463(2024).
https://doi.org/10.1016/j.conbuildmat.2024.136463
Yang, M., Chen, L., Lai, J., Osman, A. I., Farghali, M., Rooney, D. W. and Yap, P. S., Advancing environmental sustainability in construction through innovative low-carbon, high-performance cement-based composites, A review, Mater. Today. Sustain., 26, 100712(2024).
https://doi.org/10.1016/j.mtsust.2024.100712
Yeh, C. H., Wu, J. H. and Yang, T. C., Drying Shrinkage and Mechanical Strength of Cementitious Composites with Alkali-Treated Makino Bamboo Fibers, J. Nat. Fibers., 21(1), 2321531(2024).
https://doi.org/10.1080/15440478.2024.2321531
Zhang, G. -Z., Liu, C., Cheng, P. -F., Li, Z., Han, Y. and Wang, X. -Y., Enhancing the interfacial compatibility and self-healing performance of microbial mortars by nano-SiO2-modified basalt fibers, Cem. Concr. Compos., 152, 105650(2024).
https://doi.org/10.1016/j.cemconcomp.2024.105650
Zhang, J., Li, J., Zhang, L., Liu, Z. and Jiang, Z., Dynamic Performance of Foam Concrete With Recycled Coir Fiber, Front. Mater., 7, 567655(2020).
https://doi.org/10.3389/fmats.2020.567655
Zhu, M., Du, C., Yi, F., Tao, H., Cheng, C. and Jiang, J., Nano-modification of basalt fiber surface and its improvement on mechanical properties and salt resistance of cement-based materials, Constr. Build. Mater., 472, 141000(2025).
