Applications of Nanotechnology in Electric Vehicles: Enhancing Energy Efficiency and Reducing Environmental Impact
J. Environ. Nanotechnol., Volume 14, No 2 (June 2025) pp. 29-41
Abstract
With an immediate global transition towards electric vehicles (EVs) to promote sustainable mobility, electronics has gained importance, which not only improves car performance but also mitigates people-induced environmental damage in the form of vehicular emissions. Nanotechnology has come forth as one of the transformative solutions, providing immense advancements in energy storage, structural materials, power electronics, and sustainable manufacturing technologies. This review aims to look into the diversified roles of nanomaterials in EV design and development, with a strong emphasis on lithium-ion batteries, as well as solid-state counterparts, supercapacitors and nanocomposites for weight reduction. It further emphasizes on the incorporation of nanotechnology in powertrain cooling systems, green synthesis processes and recycling mechanisms. In addition, this work covers safety, toxicity, and regulatory aspects, as well as the environmental advantages of nanotechnology as far as carbon attenuation is concerned. Real-world applications and future directions are illustrated through recent industry advances, case studies, and ongoing research. In summary, the review highlights the main challenges and opportunities in the journey towards energy-saving and eco-friendly electric vehicles of next generation, which are the focus of nanotechnology.
Full Text
Reference
Aarti, T., Kumar, H., Binoj, B. J., Sharma, R., Kumar, G., Kumari, R., Ankit, D., Y., A., Singh, D. and Kumar, P., Developments in conducting polymer-, metal oxide-, and carbon nanotube-based composite electrode materials for supercapacitors: a review, RSC Adv., 14(14), 9406–9439 (2024).
https://doi.org/10.1039/d3ra08312h
Abniel, M., Morant, C. and Márquez, F., Advancements and Challenges in Solid-State Battery Technology: An In-Depth Review of Solid Electrolytes and Anode Innovations, Batteries, 10(1), 29–29 (2024).
https://doi.org/10.3390/batteries10010029
Ahmed, S. F., M. Mofijur, Rafa, N., Chowdhury, A. T., Chowdhury, S., Muntasha, N., I. A. B. M. S., and Ong, H. C., Green approaches in synthesising nanomaterials for environmental nanobioremediation: Technological advancements, applications, benefits and challenges, Environ. Res., 204, 111967–111967 (2021).
https://doi.org/10.1016/j.envres.2021.111967
Allan, J., Belz, S., Arnd Hoeveler, Hugas, M., Okuda, H., Patri, A., Rauscher, H., Silva, P., Slikker, W., Sokull-Kluettgen, B., Tong, W., & Anklam, E., Regulatory landscape of nanotechnology and nanoplastics from a global perspective, Regul. Toxicol. Pharm., 122, 104885–104885 (2021).
https://doi.org/10.1016/j.yrtph.2021.104885
Alperen, M. Ç. and Erdal, I., Electric Vehicle Advancements, Barriers, and Potential: A Comprehensive Review, Electr. Power Compon. Syst., 51(17), 2010–2042(2023).
https://doi.org/10.1080/15325008.2023.2239238
Alsaiari, N. S., Alzahrani, F. M., Amari, A., Osman, H., Harharah, H. N., Noureddine Elboughdiri, & Tahoon, M. A., Plant and Microbial Approaches as Green Methods for the Synthesis of Nanomaterials: Synthesis, Applications, and Future Perspectives, Mol., 28(1), 463–463 (2023).
https://doi.org/10.3390/molecules28010463
Arnold, S., Jean, Kim, C. and Presser, V., Electrochemical recycling of lithium‐ion batteries: Advancements and future directions. EcoMat, 6(11), 1-30(2024).
https://doi.org/10.1002/eom2.12494
Asset, T. and Atanassov, P., Iron-Nitrogen-Carbon Catalysts for Proton Exchange Membrane Fuel Cells. Joule, 4(1), 33–44(2019).
https://doi.org/10.1016/j.joule.2019.12.002
Awasthi, S. and Sharma, J. G., Toxicity and Challenges of Nanomaterials and Their Impact on the Environment, Nat. Environ. Pollut. Technol., 21(2), 643–650 (2022).
https://doi.org/10.46488/nept.2022.v21i02.023
Balaji, N. K. R., Pratyusha, D., Sravanthi, B., and Jayakiran, R. E., Recent AI Applications in Electrical Vehicles for Sustainability, Int. J. Mech. Eng., 11(3), 50–64(2024).
https://doi.org/10.14445/23488360/ijme-v11i3p106
Bhattacharya, M., Polymer Nanocomposites—A Comparison between Carbon Nanotubes, Graphene, and Clay as Nanofillers, Mater., 9(4), 262–262 (2016).
https://doi.org/10.3390/ma9040262
Borup, R. L., Ahmet, K. N. K. C., Rangachary, M. A. R. K., Cullen, D. A., More, K. L., Weber, A. Z. and Myers, D. J., Recent developments in catalyst-related PEM fuel cell durability. Current Opinion in Electrochemistry, 21, 192–200 (2020).
https://doi.org/10.1016/j.coelec.2020.02.007
Celadon, A., Sun, H., Sun, S. and Zhang, G., Batteries for electric vehicles: Technical advancements, environmental challenges, and market perspectives, SusMat, 4(5), e234(2024).
https://doi.org/10.1002/sus2.234
Chaudhari, D. S., Comprehensive analysis of the environmental impact of Electric Vehicles (EVs), World J. Adv. Eng. Technol. Sci., 13(2), 663–670(2024).
https://doi.org/10.30574/wjaets.2024.13.2.0656
Chávez-Hernández, J. A., Aída, J., V. S., Navarro-Tovar, G. and Gonzalez, C., Safe nanomaterials: from their use, application, and disposal to regulations, Nanoscale Adv., 6(6), 1583–1610 (2024).
https://doi.org/10.1039/d3na01097j
Chen, Y., Advancements in Nanotechnology for Vehicle Frames: Enhancing Safety and Performance, Highlights Sci. Eng. Technol., 121, 227–231 (2024).
https://doi.org/10.54097/vd0mm977
Chen, Y., Zhang, H., Yang, Y., Wang, M., Cao, A. and Yu, Z., High‐Performance Epoxy Nanocomposites Reinforced with Three‐Dimensional Carbon Nanotube Sponge for Electromagnetic Interference Shielding, Adv. Funct. Mater., 26(3), 447–455 (2016).
https://doi.org/10.1002/adfm.201503782
Choudhary, M., Sharma, A., Raj, S. A., Thariq, M., Hui, D. and Ain, Contemporary review on carbon nanotube (CNT) composites and their impact on multifarious applications, Nanotechnol. Rev., 11(1), 2632–2660 (2022).
https://doi.org/10.1515/ntrev-2022-0146
Cui, Y., Nanostructured Solid Electrolytes for Enhanced Safety and Performance of Battery Materials, Highlights Sci. Eng. Technol., 116, 132–141 (2024).
https://doi.org/10.54097/kn2tkg66
Do, T. V., Trovao, P. F., Li, K. and Loic, B., Wide-Bandgap Power Semiconductors for Electric Vehicle Systems: Challenges and Trends, IEEE Veh. Technol. Mag., 16(4), 89–98 (2021).
https://doi.org/10.1109/mvt.2021.3112943
Dos, S. O. A. L., Backx, B. P., Abumousa, R. A. and Bououdina, M., Environmental Implications Associated with the Development of Nanotechnology: From Synthesis to Disposal, Nanomater., 12(23), 4319–4319 (2022).
https://doi.org/10.3390/nano12234319
Ellingsen, L. A. W., Hung, C. R., Majeau, B. G., Singh, B., Chen, Z., Whittingham, M. S. and Strømman, A. H., Nanotechnology for environmentally sustainable electromobility, Nat. Nanotechnol., 11(12), 1039–1051(2016a).
https://doi.org/10.1038/nnano.2016.237
Esiri, A. E., Mensah, J. K., Darlington, E. E., Ogundipe, B. O. and Heavens, A. I., Assessing the environmental footprint of the electric vehicle supply chain, Magna Scientia Adv. Res. Rev., 8(2), 219–227(2023).
https://doi.org/10.30574/msarr.2023.8.2.0099
Fengbo, W., Jinbao, S. and Tantan, X., Oxide ceramic coatings on orthopaedic implants: A review of TiO2 AND Al2O3, Ceram. Silik., 67(4), 525–542 (2023).
https://doi.org/10.13168/cs.2023.005
Ghazanfari, A., Perreault, C. and Karim, Z., EV/HEV Industry Trends of Wide-bandgap Power Semiconductor Devices for Power Electronics Converters, 2019 IEEE 28th International Symposium on Industrial Electronics (ISIE), Vancouver, BC, Canada, 1917–1923 (2019).
https://doi.org/10.1109/isie.2019.8781528
Gnanavendan, S., Selvaraj, S. K., Dev, S. J., Mahato, K. K., Swathish, R. S., Sundaramali, G., Accouche, O. and Azab, M., Challenges, Solutions and Future Trends in EV-Technology: A Review, IEEE Access, 12, 17242–17260(2024).
https://doi.org/10.1109/access.2024.3353378
Goti, E., Mura, A., Confiengo, G. M. G. D. and Casalegno, V., The tribological performance of super-hard Ta:C DLC coatings obtained by low-temperature PVD, Ceram. Int., 49(24), 40193–40210 (2023).
https://doi.org/10.1016/j.ceramint.2023.09.355
Guo, Y., Hu, J. and Wan, L., Nanostructured Materials for Electrochemical Energy Conversion and Storage Devices, Adv. Mater., 20(15), 2878–2887 (2008).
https://doi.org/10.1002/adma.200800627
Gutowski, W., Voytek, S., Yang, W., Li, S., Dean, K. and Zhang, X., Lightweight Nanocomposite Materials, Lightweight Sustainable Mater. Automot. Appl., 277–302 (2017).
https://doi.org/10.1201/9781315152967-8
Hassan, Q., Itimad, D. J., Azzawi, A. Z. S. and Salman, H. M., Hydrogen Fuel Cell Vehicles: Opportunities and Challenges, Sustainability, 15(15), 11501–11501 (2023).
https://doi.org/10.3390/su151511501
Huang, X., Zhu, W., Yao, J., Bu, L., Li, X., Tian, K., Lu, H., Quan, C., Xu, S., Xu, K., Jiang, Z., Zhang, X., Gao, L. and Zhao, J., Suppressing structural degradation of Ni-rich cathode materials towards improved cycling stability enabled by a Li2MnO3 coating, J. Mater. Chem. A, 8(34), 17429–17441 (2020).
https://doi.org/10.1039/d0ta00924e
Huang, Z., Li, Y. and Xu, Y., Diverse Nanotechnology Applications for Electric Vehicles, Highlights Sci. Eng. Technol., 43, 438–449 (2023).
https://doi.org/10.54097/hset.v43i.7462
Hussin, F. N. N. M., Abdul, W. R. and Attan, N., Nanocellulose and nanoclay as reinforcement materials in polymer composites: A review, Malays. J. of Fundam. . Appl. Sci., 16(2), 145–153 (2020).
https://doi.org/10.11113/mjfas.v16n2.1430
Hwang, J. Y., Myung, S. T. and Sun, Y. K., Sodium-ion batteries: present and future, Chem. Soc. Rev., 46(12), 3529–3614 (2017).
https://doi.org/10.1039/c6cs00776g
Jose, S. A., Dworkin, L., Montano, S., Noack, W. C., Rusche, N., Williams, D. and Menezes, P. L., Pathways to Circular Economy for Electric Vehicle Batteries, Recycl., 9(5), 76(2024).
https://doi.org/10.3390/recycling9050076
Jurak, S. F., Jurak, E. F., Uddin, M. N. and Ramazan, A., Functional Superhydrophobic Coating Systems for Possible Corrosion Mitigation, Int. J. Autom. Technol., 14(2), 148–158 (2020).
https://doi.org/10.20965/ijat.2020.p0148
Kan, J., Optimization of Electrode Materials for Lithium-Ion and Sodium-Ion Batteries in Electric Vehicles, Highlights Sci. Eng. Technol., 121, 619–624 (2024).
https://doi.org/10.54097/xca1qg21
Kardani, S. L., Nanocarrier-based formulations: Regulatory Challenges, Ethical and Safety Considerations in Pharmaceuticals, J. Pharm., 18(02), (2024).
https://doi.org/10.22377/ajp.v18i02.5444
Khan, N. I. and Halder, S., Self-healing fiber-reinforced polymer composites for their potential structural applications, Self-Healing Polymer-Based Systems, 455–472 (2020).
https://doi.org/10.1016/b978-0-12-818450-9.00015-5
Kiani, M., Soheil, O., Ehsan, H., Seyed, R. M., Mehdi, A. and Nejad, A. M., Lithium-ion battery thermal management system with Al2O3/AgO/CuO nanofluids and phase change material, Appl. Therm. Eng., 180, 115840–115840 (2020).
https://doi.org/10.1016/j.applthermaleng.2020.115840
Kumar, K. and Kundu, R., Empowering Energy Storage Technology: Recent Breakthroughs and Advancement in Sodium-Ion Batteries, ACS Appl. Energy Mater., 7(9), 3523–3539 (2024).
https://doi.org/10.1021/acsaem.4c00592
Kumar, N., Kim, S. B., Lee, S. Y. and Park, S. J., Recent Advanced Supercapacitor: A Review of Storage Mechanisms, Electrode Materials, Modification, and Perspectives, Nanomater., 12(20), 3708 (2022).
https://doi.org/10.3390/nano12203708
Li, J., Nanomaterials in Solid-State Batteries: Enhancing Safety and Performance. Highlights Sci. Eng. Technol., 116, 149–155 (2024).
https://doi.org/10.54097/v8kb3r67
Li, P., Luo, S., Zhang, L., Liu, Q., Wang, Y., Lin, Y., Xu, C., Guo, J., Cheali, P. and Xia, X., Progress, challenges, and prospects of spent lithium-ion batteries recycling: A review, J. Energy Chem., 89, 144–171(2024).
https://doi.org/10.1016/j.jechem.2023.10.012
Liang, Y., Lai, W., Miao, Z. and Chou, S., Nanocomposite Materials for the Sodium–Ion Battery: A Review, Small, 14(5), (2017).
https://doi.org/10.1002/smll.201702514
Madani, M., Shimaa, H., Dalal, M., Alshangiti, N. N., Alkhursani, S. A., Huda, A. S. A. A., Ghobashy, M. M. and Gaber, G. A., Green synthesis of nanoparticles for varied applications: Green renewable resources and energy-efficient synthetic routes, Nanotechnol. Rev., 11(1), 731–759 (2022).
https://doi.org/10.1515/ntrev-2022-0034
Madrid, J. A., Electric and Hybrid Vehicle Battery Technologies: Advancements and Challenges, Int. J. Adv. Res. Sci. Commun. Technol., 3(1), 803–807(2023).
https://doi.org/10.48175/ijarsct-11960
Malhotra, R., Han, Y. M., Morin, J. L. P., E. K., Luong-Van, Chew, R. J. J., Neto, A. H. C., Nijhuis, C.A. and Rosa, V., Inhibiting Corrosion of Biomedical-Grade Ti-6Al-4V Alloys with Graphene Nanocoating, J. Dent. Res., 99(3), 285–292 (2020).
https://doi.org/10.1177/0022034519897003
Manoharan, S., Krishnamoorthy, K., Sathyaseelan, A. and Kim, S. J., High-power graphene supercapacitors for the effective storage of regenerative energy during the braking and deceleration process in electric vehicles, Mater. Chem. Front., 5(16), 6200–6211 (2021).
https://doi.org/10.1039/d1qm00465d
Manthiram A., Vadivel Murugan A., Sarkar, A. and Muraliganth, T., Nanostructured electrode materials for electrochemical energy storage and conversion, Energy Environ. Sci., 1(6), 621–621 (2008).
https://doi.org/10.1039/b811802g
Meng, Z., Enhancing Battery Performance and Safety Through Nanomaterial Coatings. Highlights Sci. Eng. Technol., 116, 257–263 (2024).
https://doi.org/10.54097/c6mtz744
Miao, Y., Hynan, P., von Jouanne, A. and Yokochi, A., Current Li-Ion Battery Technologies in Electric Vehicles and Opportunities for Advancements, Energies, 12(6), 1074 (2019).
https://doi.org/10.3390/en12061074
Narisetty, V. S. C. P. and Maddineni, T., Powering the Future: Innovations in Electric Vehicle Battery Recycling, ArXiv (Cornell University), 20, 2288–2301(2024).
https://doi.org/10.48550/arXiv.2412.20687
Naskar, A. K., Keum, J. K. and Boeman, R. G., Polymer matrix nanocomposites for automotive structural components, Nat. Nanotechnol., 11(12), 1026–1030 (2016).
https://doi.org/10.1038/nnano.2016.262
Nor, F. R., Norazuwana, S., Siti, K. K., Mohd, S. M. and Yunus, R. M., An overview of nanomaterials in fuel cells: Synthesis method and application, Int. J. Hydrogen Energy, 47(42), 18468–18495 (2022).
https://doi.org/10.1016/j.ijhydene.2022.03.035
Olabi, A. G. , Maghrabie, H. M., Hameed, O., Sayed, E. T., Yousef, B. A. A., Salameh, T., Kamil, M. and Abdelkareem, M. A., Battery thermal management systems: Recent progress and challenges, Int. J. Thermofluids, 15, 100171–100171 (2022).
https://doi.org/10.1016/j.ijft.2022.100171
Omata, C. I., Kehinde, T. O., Ishiwu, J. I., Ojo, O. T., Ogunkanmi, S. A., Salman, M. B. and Bello, A. R., Advances in nanomaterials for lithium-ion batteries: Enhancing energy density and lifespan, World J. Adv. Eng. Technol. Sci., 13(2), 560–588 (2024).
https://doi.org/10.30574/wjaets.2024.13.2.0631
Osman, A. I., Zhang, Y., Farghali, M., Rashwan, A. K., Eltaweil, A. S., Eman, M., Badr, M. M., Ihara, I., Rooney, D. W. and Yap, P. S.,. Synthesis of green nanoparticles for energy, biomedical, environmental, agricultural, and food applications: A review, Environ. Chem. Lett., 22(2), 841–887 (2024).
https://doi.org/10.1007/s10311-023-01682-3
Palomares, V., Serras, P., Irune, V., Hueso, K. B., Carretero-González, J. and Rojo, T., Na-ion batteries, recent advances and present challenges to become low cost energy storage systems, Energy Environ. Sci., 5(3), 5884–5884 (2012).
https://doi.org/10.1039/c2ee02781j
Pandey, D., Kumar, K. S., Henderson, L. N., Suarez, G., Vega, P., Salvador, H. R., Roberson, L. and Thomas, J., Energized Composites for Electric Vehicles: A Dual Function Energy‐Storing Supercapacitor‐Based Carbon Fiber Composite for the Body Panels, Small, 18(9), 2107053 (2022).
https://doi.org/10.1002/smll.202107053
Raj, T., Chandrasekhar, K., Kumar, A. N., Sharma, P., Pandey, A., Jang, M., Jeon, B. H., Sunita Varjani, and Kim, S. H., Recycling of cathode material from spent lithium-ion batteries: Challenges and future perspectives, J. Hazard. Mater., 429, 128312–128312 (2022).
https://doi.org/10.1016/j.jhazmat.2022.128312
Rajaeifar, M. A., Ghadimi, P., Raugei, M., Wu, Y. and Heidrich, O., Challenges and recent developments in supply and value chains of electric vehicle batteries: A sustainability perspective, Res. Conserv. Recycl., 180, 106144(2022).
https://doi.org/10.1016/j.resconrec.2021.106144
Ren, Y., Zhang, L., Xie, G., Li, Z., Chen, H., Gong, H., Xu, W., Guo, D. and Luo, J., A review on tribology of polymer composite coatings, Frict., 9(3), 429–470 (2020).
https://doi.org/10.1007/s40544-020-0446-4
Reslan, J., Saadaoui, M. and Djenizian, T., Synthesis and Structural Design of Graphene, Silicon and Silicon‐Based Materials Including Incorporation of Graphene as Anode to Improve Electrochemical Performance in Lithium‐Ion Batteries, Adv. Mater. Interfaces, 11(19). (2024).
https://doi.org/10.1002/admi.202301062
Rimamnya, N. D., Samson, A., Bunmi, D., Abass, G., Olaniyan, A., Samson, I., Moyofoluwa, O. and Kolawole, B., Evolution of Carbon Nanotubes, Their Methods, and Application as Reinforcements in Polymer Nanocomposites: A Review, J. of Adv. Mech. Eng. Appl., 4(1), 49–63 (2023).
https://doi.org/10.30880/jamea.2023.04.01.007
Robles, E., Matallana, A., Iker, A., Andreu, J., Markel, F. and José, Luis, M., The role of power device technology in the electric vehicle powertrain, Int. J. Energy Res., 46(15), 22222–22265 (2022).
https://doi.org/10.1002/er.8581
Roy, P. and Srivastava, S. K., Nanostructured anode materials for lithium ion batteries, J. Mater. Chem. A, 3(6), 2454–2484 (2015).
https://doi.org/10.1039/c4ta04980b
Sanguesa, J. A., Torres, S. V., Garrido, P., Martinez, F. J., and Marquez, B. J. M., A Review on Electric Vehicles: Technologies and Challenges, Smart Cities, 4(1), 372–404(2021).
https://doi.org/10.3390/smartcities4010022
Sburlan, I. C., Vasile, I. and Tudor, E., Comparative study between semiconductor power devices based on silicon Si, silicon carbide SiC and gallium nitrate GaN used in the electrical system subassembly of an electric vehicle, 2021 International Semiconductor Conference (CAS), 107–110 (2021).
https://doi.org/10.1109/cas52836.2021.9604127
Shafique, M. and Luo, X., Nanotechnology in Transportation Vehicles: An Overview of Its Applications, Environmental, Health and Safety Concerns, Mater., 12(15), 2493–2493 (2019).
https://doi.org/10.3390/ma12152493
Shah, R., Mittal, V. and Precilla, A. M., Challenges and Advancements in All-Solid-State Battery Technology for Electric Vehicles, J, 7(3), 204–217 (2024).
https://doi.org/10.3390/j7030012
Shah, V., Jaydip, B., Patel, G. M. and Deshmukh, K., Advances in polymeric nanocomposites for automotive applications: A review, Polym. Adv. Technol., 33(10), 3023–3048 (2022).
https://doi.org/10.1002/pat.5771
Shukla, A. K. and Kumar, T. P., Nanostructured electrode materials for electrochemical energy storage and conversion, Wiley Interdiscip. Rev. Energy Environ., 2(1), 14–30 (2012).
https://doi.org/10.1002/wene.48
Somashekarappa M., Advancements in electric vehicle battery technology: Improving range and charging efficiency, World J. Adv. Res. Rev., 2(2), 036–047(2019).
https://doi.org/10.30574/wjarr.2019.2.2.0024
Srinivas, V., Thakur, R. N., Jain, A. K. and Saratchandra, B. M., Tribological Studies of Transmission Oil Dispersed With Molybdenum Disulfide and Tungsten Disulfide Nanoparticles, J. Tribol., 139(4), 1-6(2017).
https://doi.org/10.1115/1.4034766
Summèra, B., Mir, M. J. and Wani, M. F., Solid Lubricant Coatings, CRC Press EBooks, 85–102 (2021).
https://doi.org/10.1201/9781003092162-8
Sun, L., Nanotechnology in the Field of Electric Vehicles. Highlights Sci. Eng. Technol., 43, 327–332 (2023).
https://doi.org/10.54097/hset.v43i.7436
Sun, W. and Wang, Y., Graphene-based nanocomposite anodes for lithium-ion batteries, Nanoscale, 6(20), 11528–11552 (2014).
https://doi.org/10.1039/c4nr02999b
Sun, X., Li, Z., Wang, X. and Li, C., Technology Development of Electric Vehicles: A Review, Energies, 13(1), 90–90(2019).
https://doi.org/10.3390/en13010090
Tang, Z., Assessing the State of Electric Vehicle Recycling and the Road Ahead to Complete Sustainability, Sci. Soc. Res., 6(7), 190–203(2024).
https://doi.org/10.26689/ssr.v6i7.7655
Thakur, A. and Kumar, A., Ecotoxicity Analysis and Risk Assessment of Nanomaterials for the Environmental Remediation, Macromol. Symp., 410(1), 2100438 (2023).
https://doi.org/10.1002/masy.202100438
Thomas, F., Mahdi, L., Lemaire, J. and Santos, Technological Advances and Market Developments of Solid-State Batteries: A Review, Materi., 17(1), 239–239 (2024).
https://doi.org/10.3390/ma17010239
Vedarajan, R., Prithi, J. and Rajalakshmi, N., Advanced nanocatalysts for fuel-cell technologies, Nanomater. Sustainable Energy and Environ. Rem., 165–191 (2020).
https://doi.org/10.1016/b978-0-12-819355-6.00006-6
Vishu Girotra, Kaushik, P. and Dipti, V., Exploring sustainable synthesis paths: a comprehensive review of environmentally friendly methods for fabricating nanomaterials through green chemistry approaches, Turkish J. Chem., 48(5), 703–725 (2024).
https://doi.org/10.55730/1300-0527.3691
Wang, A,. Nanotechnology used in Li-ion Battery for Electric Vehicles, Highlights Sci. Eng. Technol., 32, 325–331 (2023a).
https://doi.org/10.54097/hset.v32i.5185
Wang, B., Ryu, J., Choi, S., Zhang, X., Pribat, D., Li, X., Zhi, L., Park, S. and Ruoff, R. S., Ultrafast-Charging Silicon-Based Coral-Like Network Anodes for Lithium-Ion Batteries with High Energy and Power Densities, ACS Nano, 13(2), 2307–2315 (2019).
https://doi.org/10.1021/acsnano.8b09034
Wang, S., Tambraparni, M., Qiu, J., Tipton, J. and Dean, D., Thermal Expansion of Graphene Composites, Macromol., 42(14), 5251–5255 (2009).
https://doi.org/10.1021/ma900631c
Wang, Y., The application challenge of electric vehicles, Appl. Comput. Eng., 26(1), 86–91(2023b).
https://doi.org/10.54254/2755-2721/26/20230800
Wiriyasart S., Hommalee C. , Sirikasemsuk S. , Prurapark R. and Naphon P., Thermal management system with nanofluids for electric vehicle battery cooling modules, Case Stud. Therm. Eng., 18, 100583–100583 (2020).
https://doi.org/10.1016/j.csite.2020.100583
Xin, S., You, Y., Wang, S., Gao, H. C., Yin, Y. X. and Guo, Y. G., Solid-State Lithium Metal Batteries Promoted by Nanotechnology: Progress and Prospects, ACS Energy Lett., 2(6), 1385–1394 (2017).
https://doi.org/10.1021/acsenergylett.7b00175
Xu, Y., Innovations in Energy Through Nanomaterials Enhancing Solid-State Battery Safety and Efficacy, Highlights Sci. Eng. Technol., 116, 125–131 (2024).
https://doi.org/10.54097/6p096226
Zhang, Q., Nanotechnology for Cathode Materials in Lithium-Ion Batteries. Highlights Sci. Eng. Technol., 43, 333–339 (2023).
https://doi.org/10.54097/hset.v43i.7438
Zhang, Y. H., Wu, L. R., Ma, J. and Cui, G., Nanotechnology in solid state batteries, what’s next? Next Nanotechnol., 2, 100011–100011 (2023).
https://doi.org/10.1016/j.nxnano.2023.100011
Zhao, Z., Applications of Nanotechnology: lithium-ion based batteries in electric vehicles, Highlights Sci. Eng. Technol., 32, 83–90 (2023).
https://doi.org/10.54097/hset.v32i.4946
Zheng, W., Diverse Applications of Frontier Nanotechnology in Electric Vehicles,Highlights Sci. Eng. Technol., 121, 510–521 (2024a).
https://doi.org/10.54097/7he20n09
Zheng, Z., Enhancing Liquid Cooling Systems in Electric Vehicle Batteries: Principles and Nanomaterial Innovations. Highlights Sci. Eng. Technol., 121, 483–490 (2024).
