Open Access

Modelling of a 70 MHz SAW Filter for Potential Applications in Mobile Communication Systems

T. Venkatesan, Department of Physics, Chikkanna Government Arts College, Tiruppur, Tamilnadu, India. R. Banu Priya, Department of Physics, Gobi Arts and Science College, Gobichettipalayam, TN, India. P. Gowdhaman, Department of Physics, Chikkanna Government Arts College, Tiruppur, Tamilnadu, India. Haresh M. Pandya haresh.pandya@rediffmail.com
Department of Physics, Chikkanna Government Arts College, Tiruppur, Tamilnadu, India.


J. Environ. Nanotechnol., Volume 7, No 1 (2018) pp. 57-65

https://doi.org/10.13074/jent.2018.03.181304

PDF


Abstract

In the present paper, a 70 MHz LiNbO3 SAW filter device is designed, modelled and simulated. The frequency sampling methods and the windowing methods are adopted, and using user defined MATLAB® simulation tool was employed for developing the algorithms. A computationally simulated frequency response of 70 MHz SAW filters has compared with experimental device result. These device responses utilized and implemented during the design and development stage of these devices for their potential applications in mobile communication systems (GSM/CDMA/WCDMA) for filtering the higher order as well as intermediate frequencies.

Full Text

Reference


Atzeni, C., Masotti, L., Linear Signal Processing by Acoustic Surface-Wave Transversal Filters, IEEE Trans. Microw. Theory Tech., 21(8), 505–519 (1973).

https://dx.doi.org/10.1109/TMTT.1973.1128050

Bausk, E. V., Yakovkin, I. B., Design of low-shape-factor SAW filters having a single acoustic track, In: Proceedings of 1996 IEEE International Frequency Control Symposium. IEEE, 291–295 (1996).

Budreau, A. J., Temperature dependence of the attenuation of microwave frequency elastic surface waves in quartz, Appl. Phys. Lett. 18(6), 239 (1971).

https://dx.doi.org/10.1063/1.1653647

Campbell, C. K., Applications of surface acoustic and shallow bulk acoustic wave devices, Proc. IEEE 77(10), 1453–1484 (1989a).

https://dx.doi.org/10.1109/5.40664

Campbell, C. K., Applications of Surface Acoustic and Shallow Bulk Acoustic Wave Devices, Proc. IEEE77(10), 1453–1484 (1989b).

https://dx.doi.org/10.1109/5.40664

Cooley, J. W., Tukey, J. W., An Algorithm for the Machine Calculation of Complex Fourier Series, Math. Comput. 19(90), 297 (1965).

https://dx.doi.org/10.2307/2003354

Fall, D., Duquennoy, M., Ouaftouh, M., Piwakowski, B., Jenot, F., Modelling based on Spatial Impulse Response Model for Optimization of InterDigital Transducers (SAW Sensors) for Non Destructive Testing, Phys. Procedia., 70, 927–931 (2015).

https://dx.doi.org/10.1016/j.phpro.2015.08.192

Harris, F. J., On the use of windows for harmonic analysis with the discrete Fourier transform, Proc. IEEE 66(1), 51–83 (1978).

https://dx.doi.org/10.1109/PROC.1978.10837

Hartmann, C. S., Bell, D. T., Rosenfeld, R. C., Impulse Model Design of Acoustic Surface-Wave Filters, IEEE Trans. Microw. Theory Tech. MTT-21(4), 162–175 (1973).

https://dx.doi.org/10.1109/TMTT.1973.1127967

Hikita, M., Minami, K., Takimoto, H., Sakiyama, K., Investigation of attenuation increase at lower-side frequency bands for highly-integrated SAW modules, Electron. Lett., 42(25), 1488-1489 (2006).

https://dx.doi.org/10.1049/el:20062644

Kaur, M., Sangeet, P. K., FIR Low Pass Filter Designing Using Different Window Functions and their Comparison using MATLAB, Int. J. Adv. Res. Electr. Electron. Instrum. Eng. 5(2), 753- (2016).

https://dx.doi.org/10.15662/IJAREEIE.2016.0502016

Laker, K., Cohen, E., Szabo, T., Pustaver, J., Computer-aided design of withdrawal-weighted SAW bandpass filters, IEEE Trans. Circuits Syst. 25(5), 241–251 (1978).

https://dx.doi.org/10.1109/TCS.1978.1084469

Luo, C., Gudem, P. S., Buckwalter, J. F., A 0.4–6-GHz 17-dBm B1dB 36-dBm IIP3 Channel-Selecting Low-Noise Amplifier for SAW-Less 3G/4G FDD Diversity Receivers, IEEE Trans. Microw. Theory Tech. 64(4), 1110–1121 (2016).

https://dx.doi.org/10.1109/TMTT.2016.2529598

Morgan, D. R., Surface acoustic wave devices and applications: 1. Introductory review, Ultrasonics, 11(3), 121–131 (1973).

https://dx.doi.org/10.1016/0041-624X(73)90608-2

Nyquist, H., Certain Topics in Telegraph Transmission Theory, Trans. Am. Inst. Electr. Eng. 47(2), 617–644 (1928).

https://dx.doi.org/10.1109/T-AIEE.1928.5055024

Panasik, C. M., Hunsinger, B. J., Precise Impulse Response Measurement of SAW Filters, IEEE Trans. Sonics Ultrason., 23(4), 239–248 (1976).

https://dx.doi.org/10.1109/T-SU.1976.30868

Parker, K., Apodization and windowing eigenfunctions, IEEE Trans. Ultrason. Ferroelectr. Freq. Control 61(9), 1575–1579 (2014).

https://dx.doi.org/10.1109/TUFFC.2014.3071

Peach, R. C., Dix, C., A Low Loss Medium Bandwidth Filter on Lithium Niobate, In: 1978 Ultrasonics Symposium. IEEE, 509–512 (1978).

Peroulis, D., Loeches-Sánchez, R., Gómez-García, R., Psychogiou, D., Hybrid surface-acoustic-wave/microstrip signal-interference bandpass filters, IET Microwaves, Antennas Propag. 10(4), 426–434 (2016).

https://dx.doi.org/10.1049/iet-map.2015.0346

Priya, R. B., Venkatesan, T., Pandya, H. M., A Comparison of Surface Acoustic Wave (SAW) Delay Line Modelling Techniques for Sensor Applications, J. Environ. Nanotechnol. 5(2), 42–47 (2016).

https://dx.doi.org/10.13074/jent.2016.06.162193

Venkatesan, T., Haresh M, P., Surface Acoustic Wave Devices and Sensors - A Short Review On Design and Modelling by Impulse Response, J. Environ. Nanotechnol. 2(3), 81–89 (2013).

https://dx.doi.org/10.13074/jent.2013.09.132034

Yatsuda, H., Yamanouchi, K., Automatic computer-aided design of SAW filters using slanted finger interdigital transducers, IEEE Trans. Ultrason. Ferroelectr. Freq. Control 47(1), 140–147 (2000).

https://dx.doi.org/10.1109/5 8.818756

Contact Us

  • No. 53, II Street,
    Rock Mount City, Erode,
    TN, India - 638112
  • editorjent@gmail.com
  • +91 94422 64501

Powered by

Powered by OJS